We specialize in hard to find items
All Categories
NATIKA Backup/Front/Side View Camera: No Distortion Effect Starlight Night Vision HD Metal Flush or Surface Mount CVBS | AHD Reverse Rear View Backup Camera for Cars Pickup Trucks SUVs RVs Vans
Share Tweet
*Price and Stocks may change without prior notice
*Packaging of actual item may differ from photo shown
- Electrical items MAY be 110 volts.
- 7 Day Return Policy
- All products are genuine and original
- Cash On Delivery/Cash Upon Pickup Available
NATIKA Backup/Front/Side View Camera: No Distortion Features
-
Backup camera flush mount with a LATEST 6pcs FULL glasses large-aperture optical system,the picture with very low distortion rate,you will get crystal realistic view when you backing up. Also it with a horizontal 135 degree wide view angle lens,it's great for you to check the invisible blind spot clearly and make parking safe and simple.
-
Rear view camera surface mount support IP69K waterproof IP rate. It designed with fully sealed glue filling craft, so the waterproof effect is better than IP67 and IP68, you absolutely no need to worry about water, fog or mist inside. NOTE: please separately order a suitable harness to complete installation if connect it to a FACTORY RADIO.
-
Reverse camera flush mount support both CVBS and AHD video signal output(great for Android stereos).CVBS by default,cut the purple wire loop to choose AHD format video signal (AHD,720P,30fps). It with starlight level night vision (0.005Lux,excellent low-light performance),you never worry about parking during night, rainy day or in dark garage.
-
Car backup camera's housing is metal,2 in 1 installation option design(surface or flush mount option).Also it is built in 3 multifunctional switching loops: cut the white loop for front view, cut the green loop to remove the guidelines and cut the purple loop to choose AHD format(AHD,720P,30fps)video signal output.
-
Beware: According to our experience, some cheap or old Android stereos have the setting of AHD format video signal input option, but the truth it does not work, because their hardware inside do not support it. If so, please use the default CVBS video signal output (do not cut the purple wire loop, otherwise you will get a black screen).
-
This backup car camera flush mount doesn't fit sucked type dash cam and mirror dash cam, because these dash cam have different connectors and inside PIN definition, even some of them with same size 4 PIN connector. If connect this hitch flush mount backup car camera to a GPS navigator, such as Garmin or TomTom, please separately order one more adapter which with a RCA to 2.5mm connector to complete installation.
-
Before you cut this flush mount car backup camera's purple wire loop to choose AHD format 720P 30fps video signal output, please make sure your Android stereos support AHD format video signal input first(most of old Android stereos do not support it,and it works well on selected ATOTO car stereos (work well on F7 Series, S8 series and A6 KarLink version,can not work on ATOTO A6Y Series Android stereo or SA102 Starter).
-
NATIKA offer 30 days money back guarantee,24 months replacement warranty,lifetime support guarantee and 7 days-24 hours customer service and technical support.
About NATIKA Backup/Front/Side View Camera: No Distortion
NATIKA WD-012 flush or bracket mount option, no any distorted & fish-eye effect, starlight level night vision, and IP69K waterproof backup camera.Useful Wire/Loop Control Design:Reverse camera WD-012 with 2 small wires/Loops (White and Green color).*If you need the guide line, please keep the green loop; If no need, just cut it; If you use it as a front view camera, please cut the white loop;*If you use it as a front view camera without guide line, please cut both white and green wire/loop; If as a side view camera, please rotate the middle housing part of the camera to get a prefer view angle; Look backward, keep the white loop; look forward, cut the white loop.*Note: this camera is a rear view camera with the guide line/parking line as DEFAULT. *Please power on again after you cut the small loops, then the image should be correct.Notes:*This NATIKA backup camera WD-012 is perfect for REAR, FRONT and SIDE view.* If your head unit with a reverse triggering wire, normally it is a purple/white, blue/white or pink color wire, please find it, and connect it with the extension wire's triggering wire well(small short red wire next to the RCA/AV connectors).*If the image on the screen is blurry, flickering/flash or has horizontal or vertical strip, please check all your power and video connections. Possibly use a different ground point(iron part) and wrap power and video plugs with electrical tape to insulate from interference. If it still with blurry, flickering/flash or has horizontal or vertical strip, please order a 12V DC power adapter filter rectifier to solve it, especially need for Dodge VW AUDI BMW Mercedes Benz brands vehicle.*Before you routing, if there is no image on the screen, other than check the camera, please check display setting as well. You can use other device with RCA connector, such as TV to check if the camera works.* If you use wire clamps for connection, please kindly to check if it works
