Heat Transfer Source UV Protection Coating Subli Glaze is the only do-it-yourself sublimation coating solution designed to enable sublimation decoration on a wide range of surfaces

Pay with

Heat Transfer Source UV Protection Coating Subli Features

• Subli Glaze UV Protection Coating can be applied at the end of the sublimation process (after the image has been transferred), to add a layer of protection against ultra violet radiation.

• Exposure to ultra violet light (i.e. Sunlight) can over time cause image fade; Subli Glaze UV Protection Coating reduces the effects of UV image fade.

• Used to protect transferred images against fading due to prolonged exposure to Ultra Violet light.

• Shake can well for 1 minute. Ensure surface to be sprayed is clean, dry & free from grease.

• Apply smoothly & evenly. Hold can approx. 30cm from the surface using light passes at room temperature.

• Several light passes are better than heavy coats but do not allow the spray to pool on surface

• Air dry for 24 hours. The substrate is touch dry in approximately one hour and fully cured in 24 hours.

About Heat Transfer Source UV Protection Coating Subli

Subli Glaze is the only do-it-yourself sublimation coating solution designed to enable sublimation decoration on a wide range of surfaces, such as ceramic, wood, slate, and even stone. Subli Glaze UV Protection Coating can be applied at the end of the sublimation process (after the image has been transferred), to add a layer of protection against ultra violet radiation.