We specialize in hard to find items
All Categories
DASBET 9L Fluid Extractor Manual Oil Changer Vacuum Hand Operated Engine Oil Change Fluid Extractor Hand Pump Tank Remover
Share Tweet
*Price and Stocks may change without prior notice
*Packaging of actual item may differ from photo shown
- Electrical items MAY be 110 volts.
- 7 Day Return Policy
- All products are genuine and original
- Cash On Delivery/Cash Upon Pickup Available
DASBET 9L Fluid Extractor Manual Oil Changer Vacuum Features
-
Reliable Function: The manual extraction pump quickly evacuates up to 2.38 gallons (9L). Using an oil extractor pump allows for the convenient and clean extraction of engine oil or transmission fluid directly through the dipstick tube, with a sealing cap in place to prevent any liquid spillage during transport.
-
Muti-size Hose: The vacuum oil changer includes various extended tubes with different diameters. You can choose different hoses for different working condition and improve work efficiency. After pumping the handle 4 to 10 times in a row to start the vacuum, the vacuum fluid extractor kit will extract the oil automatically.
-
Easy to Use: The oil extractor tool is a perfect tool for working on vehicles anytime and anywhere. No need to lift up or crawl under the vehicle to drain out the oil. You can extend the vacuum fluid extractor as far as possible to reach the absolute bottom of your reservoir and extract every drop of oil.
-
Wide Application: The 9 liter oil extractor is constructed from composite materials and suitable for the extraction of all types of engine and lubricating oils from cars, motorcycles, marine engines, stationary engines and industrial machinery. It is also suitable for low viscosity fluids such as water. Note: Gasoline and fluids with high volatility, high corrosion, high alkalinity and high temperature are FORBIDDEN to be used on the extractor.
-
Package Included: 1 X 9L Oil Extractor: 1 X Φ10mm Nylon Hose; 1 X Φ8mm Nylon Hose; 1 X Φ6mm Nylon Hose; 1 X Φ4mm Nylon Hose; 1 X Instruction Manual
About DASBET 9L Fluid Extractor Manual Oil Changer Vacuum
Features: -Muti-size hose: change different sizes for different condition -Evacuates All Types Of Fluid Such As Engine Oil, Transmission Fluids, And Gear Oil Coolants-Probes can be stored in the holder when not in use. -To remove oil from a car engine, simply push the probe down the dipstick hole and pump the handle on the top of the unit. -Sets up a permanent fluid transfer while you do something else. -Avoids searching for drain plug keys and getting under the vehicle. -Can also be used for draining fish tanks, basins and sinks. >>>Pay attention: This item is Manual Pump How To Use1) Warm up the oil by running the engine-This will allow the contaminates to mix and to suspend in the oil. Remove the dipstick. Note: If you can't hold the dipstick comfortably in your hands, then the oil is too hot! Wait for the oil to cool off a bit 2) Select and insert the appropriate diameter extraction tube into the dipstick pipe until it touches the bottom of the oil pan. Connect the main tube to the top of the unit and to the extraction tube 3) Pump the handle 4 to 10 times in a row to start the vacuum. The unit will extract the oil automatically. Continuous pumping is not required 4) After all the oil has been extracted, press the release valve located at the top of the unit for 5 seconds. Remove the main tube. When pouring the oil into a container, hold the pump and pour gently. Do not hold it upside down ! Bring the used oil to a recycling depot
