We specialize in hard to find items
(1)
Hanna Instruments HI98703-11 4 Piece Calibration Cuvets Standard Set, For Turbidity Meter
Share Tweet
*Price and Stocks may change without prior notice
*Packaging of actual item may differ from photo shown
- Electrical items MAY be 110 volts.
- 7 Day Return Policy
- All products are genuine and original
Hanna Instruments HI98703-11 4 Piece Calibration Features
-
The 25 mm round cuvets made from special optical glass guarantee the repeatability and consistency of the measurements
-
The cuvets should be free of scratches or cracks
-
Any cuvet with visible scratches will be discarded
-
The cuvets should be periodically washed with acid
-
Always handle the cuvet by touching only the cap or its top side (over the horizontal line)
About Hanna Instruments HI98703-11 4 Piece Calibration
The 25 mm round cuvets made from special optical glass guarantee the repeatability and consistency of the measurements. The cuvets should be free of scratches or cracks. Any cuvet with visible scratches will be discarded. The cuvets should be periodically washed with acid. After washing, the cuvets should be well rinsed many times with distilled or deionized water. Allow cuvets to air-dry and store them for long periods of time with caps, to avoid dirt entering inside. Always handle the cuvet by touching only the cap or its top side (over the horizontal line). Always store the cuvets in separate boxes or with separators between them to avoid scratches on the surface. Whenever a cuvet is used, it must be clean inside and outside. When it is placed into the instrument, it must be dry outside, completely free of fingerprints or dirt. If the cuvet is not indexed, put the cuvet with the factory mark aligned with the sign on the instrument top. To hide minor imperfections and scratches, the cuvets should be oiled outside with the supplied silicone oil. This is very important, especially for low turbidity samples (
