Diitao 4PCS W1209 12V DC Digital Temperature Controller Board with Case LED Display -50~110°C Electronic Temperature Control Module Switch Micro Thermostat with Waterproof NTC Probe, Red

Pay with

Diitao 4PCS W1209 12V DC Digital Temperature Features

• W1209 Temperature Controller Board --- The input voltage is DC12V, the output range is 1 10A relay, the refresh frequency is 0.5 seconds, the display type is 0.28 inch 3-digit digital tube

• Precise Temperature Control ---Temperature Measurement Range: -50~110℃. Control Precision: 0.1 celsius.simple operation stable performance, high safety and reliability

• Durable --- The temperature controller board features complete machine patch, wave soldering, stable performance and nice consistency; Embedded CPU chip, namely MCU, is more intelligent, consume lower power

• NTC Probe --- the NTC probe is waterproof and can control the temperature, allowing to control heating or cooling; Please note that the wood laminate case is the clear plastic case; You need to tear the wood outside layer off carefully, and the outside layer is very thin, which can protect the inside to prevent scratches; And you need to assemble and install the case by yourself

• widely used --- Digital products, automotive electronics, new energy, lighting electronics, household appliances, smart home

About Diitao 4PCS W1209 12V DC Digital Temperature

Specifications: Model: W1209 With Case Dimensions: 48.5 * 40mm Temperature Control mode: ON / OFF Temperature Range :-50 - 110 degree centigrade Resolution: When temperature is 0.1 degree, the resolution is -9.999.9, other temperature segment is 1 degree. Control Accuracy: 0.1 degree Hysteresis Accuracy: 0.1 degree Refresh Rate: 0.5s High Temperature Protection 0 - 110 degree centigrade Supply Voltage: DC 12V Static Current: Less than 35MA, attract current less than 65MA Output Voltage: DC 12V Output Power: 20A relay Measurement Input: NTC (10K 0.5%) Waterproof Sensor Environmental Requirements: -10 - 60 degree centigrade; Humidity 20% - 85% Instructions for use: Connect the power supply and equipment, the measuring temperature is displayed, press the "SET" button, press " + or - " to set the desired temperature (long press " + or - " to quickly increase or decrease), press "SET" to confirm the setting and return, controller automatically performs the relay ON/OFF. the thermostat output is 10A relay, meet a variety of high-power loads. LED Indicator: LED off indicates the relay off; Lighting, indicates the relay is closed. Digital LED Tubes: "LL" indicates sensor open, "HH" indicates overrange, the relay will be forcibly disconnected; "---" indicates high temperature alarm Long press the "SET" button to enter the main menu settings, press " + or - " to switching between P0-P6, then long press "SET" or 10 seconds without keystrokes to confirm the setting and return. Package Included: 4 * W1209 12V DC Red Digital Temperature Controller Board With Case