Synthrotek Bus Cheeks DIY Kit - Eurorack rails, cheeks and bus board in one! (60HP, 40 Slide Nuts)

Pay with

About Synthrotek Bus Cheeks DIY Kit - Eurorack

Bus Cheeks are just what they sound like: cheek ends with bus boards built in on either side. There are enough 16-pin connectors to power thirteen modules, and there are LED indicators for each power rail. Just plug in a power module and you're all set! This kit comes with Synthrotek eurorack rails and includes slide nuts and a long 16-pin ribbon cable that runs from one cheek to the other (so that both cheeks light up and distribute power). This circuit does require some tight soldering and a steady hand. Please note: Bus Cheeks do not have an internal power supply; you will need to connect a power supply to them if you want to distribute power to your modules. Specifications: Supplies power for 13 modules*  Max module depth: 70mm** Power consumption (total for both ends): +12V: 0.5mA -12V: 0.5mA +5V: 6.5mA *There are 8 connectors on each cheek, but if you plug in a power supply module and run a bus cable between the cheeks, you end up with 13 usable connectors. If you need more connections, you can run one of our Deluxe Flying Bus Cables between the cheeks. **Modules adjacent to the cheek ends have 15mm of clearance before hitting the red LED and 38mm of clearance before hitting a 16-pin connector. It's a great place for a 2HP passive module or anything shallow. Assembly Instructions available online!