We specialize in hard to find items
All Categories
JBL JRX212 12" DJ P/A Speaker Floor Wedge Monitor Bundle with Crown Pro XLi1500 PA Power Amplifier and Rockvile RCSS1610 10' 16 AWG Speakon to Speakon Speaker Cable
Share Tweet
*Price and Stocks may change without prior notice
*Packaging of actual item may differ from photo shown
- Electrical items MAY be 110 volts.
- 7 Day Return Policy
- All products are genuine and original
JBL JRX212 12" DJ P/A Speaker Floor Wedge Monitor Features
-
Package Includes: (2) JBI Pro JRX212 12" 2000 Watt Professional Passive PA/DJ Speakers 8 Ohm JRX 212. (1) Crown Pro XLi1500 900w 2 Channel DJ/PA Power Amplifier Professional Amp XLI 1500. (2) Rockvile RCSS1610 10' 16 AWG Speakon to Speakon Speaker Cable 100% Copper. Features of JRX212: JBI Pro JRX212 12" 1000 Watt 8 Ohm Passive PA/DJ Speaker. JBI 12 in low frequency driver with a 64 mm (2.5 in) diameter edge wound ribbon voice coil. JBI 2414H-C 25 mm (1 in) polymer diaphragm compression driver
-
Advanced network topology crossover design. High-voltage capacitors and inductors with massive cores and heavy gauge wire. Progressive Transition high frequency waveguide. 19 mm (.75 in) MDF (Medium Density Fiberboard) enclosure. SonicGuard protects the high frequency driver from excess power without interrupting the performance. Non-resonant, all-steel handles. 18-gauge hexagon perforated, steel grille Dual-angle pole-mount socket allows the speaker to tilt 10. Specifications:
-
Power Rating : 250 W / 1000 W. Frequency Range (-10 dB) : 60 Hz - 20 kHz. Frequency Response (3 dB) : 80 Hz - 18 kHz. Sensitivity (@1m) : 98 dB SPL (1w/1m). Nominal Impedance : 8 ohms. Recommended Amplifier Power : 250 W to 500 W into 8 ohms. Maximum SPL : 128 dB. Nominal Dispersion : 90 x 50. Crossover Frequency : 2.1 kHz. Dimensions (H x W x D) : 584 mm x 399 mm x 325 mm (23 in x 15.7 in x 12.8 in). Weight : 19.5 kg (43 lb)
-
High Frequency Driver : JBI 2414H-C 1" exit compression driver mounted on Progressive Transition Waveguide. Low Frequency Driver : JBI M112-8. Input Connectors : Neutrik Speakon NL-4 (x1); .25 in. TS phone jack (x1); parallel. Grille : 18-gauge, powder-coated steel. Mounting & Suspension : 36 mm, dual-angle pole-mount socket. Features: Crown Pro XLi1500 900 Watt 2-Channel DJ/PA Power Amplifier. RMS Power @ 4 Ohms: 450 Watts x 2 Channels. RMS Power @ 8 Ohms: 330 Watts x 2 Channels
-
RMS Power @ 8 Ohms Bridged: 900 Watts x 1. Frequency Response: 20 Hz - 20 kHz. THD: <0.5%. Distortion: <0.35%. Slew Rate: >10V/us. Voltage Gain: 31 dB. Damping Factor: 8 Ohms, 10 Hz to 400 Hz. Signal to Noise Ratio (A-Weighted): >100 dB. Crosstalk: -75 dB, -59 dB. Input Sensitivity: 0.775V or 1.4V. Input Impedance: 20k Ohms, 10k Ohms. AC Voltage: 110-120V~60 Hz. IEC Power Connector: 15A. Stereo/parallel/bridge-mono mode. User selectable input sensitivity - 0.775V and 1.4V
About JBL JRX212 12" DJ P/A Speaker Floor Wedge Monitor
Efficient forced-air cooling prevents excessive thermal buildup. Electronically balanced RCA & XLR inputs; binding post and Speakon outputs. Two level controls, power switch, power LED, and six LEDs which indicate signal presence, clip and fault for each channel. Protection against shorts, no-load, on/off thumps and radio-frequency interference. Product Dimensions: 19" x 3.5" 12.4" inches. Product Weight: 28 Lbs. Features: RockvilIe RCSS16-10 16 AWG 2-Conductor SpeakON to SpeakON Pro Speaker Cable. 100% Copper Conductors for Lower Resistance. Black PVC Jacket for Both Durability and Flexibility. Intended for High-Current Applications Only, Not Line-Level Signals. Length: 10 Ft. Gauge: 16 Powerful. Reliable. Affordable. The XLI Series of power amplifiers from Crown represents a new era in affordable, quality power amplification. All four models in the series are powerful, rugged and reliable. They are suited for musicians, DJs, and entertainers as well as houses of worship, discos, and pubs. All RockvilIe pro audio cables are made with 100% copper which boosts theefficiency of the cable. There is nothing better than 100% copper. Most of thecheaper cables on the market do not use 100% copper, instead they make theircables with CCA (Copper Clad Aluminum). CCA cables do not perform on the levelthat 100% copper cables perform at. CCA will not conduct signals efficiently. A12 gauge CCA cable will not even perform as well as a 14 gauge 100% pure coppercable, which will in turn, affect the performance and longevity of yourequipment. If you find cables on the market that do not mention the coppercontent, there is a good chance that they are selling you a cheaper cable thatis CCA and not 100% copper. RockvilIe pays an inspection company to oversee themanufacturing of the product to ensure that we provide a 100% Oxygen Free CopperCable (OFC). Our OFC cables are less prone to oxidation, and will providemaximum signal transfer. The other important factor of a cable
