All Categories
Get it between 2024-12-03 to 2024-12-10. Additional 3 business days for provincial shipping.
100W solar panel kits ideal for 12v battery charging, designed for RVs, cabins, homes, boats, caravan s, back-up and remote power use.
This kits include 4pcs Z mounting brackets and 1 pair Red and Black Solar Cable makes it easy to set up. Easy to install with pre-drilled holes on the back of panel for fast mounting and securing.
With the 30A charge controller with PWM function, it can prevent the battery from over charge, over voltage, discharge and short circuit, reversed polarity protection, battery is fully protected. You can expand your system up to a maximum of 260W 12V system or 520W 24V system.
Dimensions: 1160*510*35mm (45.6*20*1.37 inch). Weight: 15.84 lbs. Voltage at Pmax (Vmp):23V. Current at Pmax (Imp): 4.3A.
Withstand high winds (2400Pa) and snow loads (5400Pa), strong tempered glass and aluminum frame for extended outdoor use, allowing the solar panel to last for decades.
The TP-solar 100 Watt Solar Charging Kit allows you to start producing free, clean power from the sun! Basic component of off-grid 12V solar system for caravan, RVs, cars, boats, pond, green house solar systems for 12 Volt battery including GEL, SEALED, FLOODED (Wet Cell) Battery. Package included: 1 pc 100W mono solar panel 1 pc 20A 12/24V solar charge controller 1 pair 16ft solar cable (red & black) with MC4 connector 4pc Z mounting brackets 100W mono solar panel, with waterproof IP-67 rated junction box: Advanced water and dust proof level (complete protection against environmental particles and low pressure water jets). 100W solar panel specification: Nominal peak power 100W Nominal voltage (Vmp) 18V Nominal current (Imp) 5.56A Open-circuit voltage (Voc) 21.8V Short-circuit current (Isc) 5.98A Cell efficiency 19.5% Operating temperature -40°C to +80°C Dimensions: 1180*555*35mm (46.5*21.8*1.37 inch)Weight: 15.84lbs. The TP-solar 100 Watt Solar Charging Kit is the ideal solution for providing back-up power or off-grid power when you need it! This Kit includes our one PWM solar charge controller with digital display. The digital display provides detailed system information including solar panel charging amperage, battery voltage, battery temperature, amperage of load draw etc. 20A solar charge specification: Rated discharge Current: 20A. Battery Voltage: 12V/24V auto USB Output Voltage: 5V/2.5A Max solar input: 12V battery, the highest 23V, 24V battery when the highest 46V. Float charge: 13.7V Discharge stop: 10.7V Reconnect charge: 12.6 Size: 5.5*2.7*1.4 inch Weight: 0.36 LB Two usb socket, can charge two devices simultaneously (Note: power from battery, not from solar panel)