Runleader Digital Tach Hour Meter,Engine Heat Sink Temperature Gauge,Alert RPM & Temp,Backlights Display for Lawn Tractor Compressor Generator Snowmobile Marine Jet Ski Pit Bike (RL-HM035A-TS003)

Pay with

Runleader Digital Tach Hour Meter,Engine Heat Sink Features

• HOURS ---- Monitor the total run time(TOT) and single working hours(JOB) of gas engine, with ability to program previous hours(INT) for an replacement;Accomplish maintenance at recommend intervals to determine the due time(SVC);TOT & JOB hours range:0-999,99 hours;SVC timer range:5-1000 hours.

• RPM ----- Display the real-time RPM readout by vairous engine firing patterns setting to adjust engine idle speed; Alert channel for revolution exceed reminder;Viewable highest revolution since the engine started; RPM measurement range: 0-25000RPM, Alert range: 100-25000RPM.

• TEMP ---- Keep eyes on engine heat sink current and maximum temperature at all the times by probe senor TS002; Remind the temperature exceed for engine maintenance; Easy to switch between Celsius and Fahrenheit;Temp measurement & alert range: -20°C~+300°C(-4°F~+572°F)

• BACKLIGHTS ---- Default green backlight will help to use it at night or dim place, you can set the backlight mode by always-on, OFF and automatical mode(OFF default, button to wake up) as request;Red backlight will remind the engine RPM or TEMP exceed.

• OTHERS ---- Easy to mount it on proper position by stick-on, screw-on and extra bracket(not include), one-wire wrapping of spark plug for signal detect (68.8inches, workable if shorten or extend) to work right away;Favorable water and shock resistence; Battery capacity will be kept in good condition with insulation sheet during transport, it is repalceable;LCD shutdown also can extend the lifetime in vacant time;Reliable technical support and after-sales service(2 years).

About Runleader Digital Tach Hour Meter,Engine Heat Sink

Description Runleader RL-HM035A Digial Hours/RPM/TEMP Meter Gauge, Maintenace service interval,RPM & Over-temperature alert, LCD display shutdown, Battery replaceable, Waterproof design. Product Features: HOURS COUNTER ￭ Accumulate engine total and partial working hours when it shutdown, timing read up to 999,99 hours with 0.1/1 hour accuracy. ￭ It restart from 0 when value exceed 999,99 hours. ￭ Count-down tracking for maintenance time, display the arrival status by red backlight and flashed SVC icon. ￭ Maintenance time range: 5-1000 hours with OFF selection. ￭ TOT initial hours can be programmed for replace an old hour meter. ￭ Record the times per engine working period. RPM METER GAUGE ￭ Record real-time RPM value when engine is on, measurement range 0-25000RPM with 10 RPM resolution. ￭ Maximum RPM value record and recall. ￭ Programmable RPM alert to remind the revolution speed exceed by red backlight display and flashed warning icon. ￭ The engine firing patterns to be chosen for RPM accuracy adjustment,suitable for gas engine 2 stroke up to 3 cylinders, 4 stroke up to 16 cylinders and 6 stroke 2 cylinder. TEMPERATURE GAUGE ￭ Display the current and maximum engine heat sink temperature by connected probe sensor(TS003). ￭ Maximum temperature value is resettable. ￭ Over-temperature alert remind you the engine heat sink temperature exceed to keep the engine healthy. ￭ When temperature value exceed alert value,it will display red backlight display and flashed warning icon. ￭ Temp measurement & alert range: -20°C~+300°C(-4°F~+572°F) Specification ￭ 24 Hours clock time display. ￭ Internal replaceable CR2032 battery , Data retained after battery change. ￭ LCD window size:approx.1.62×0.67 inches ￭ Product size:approx.2.75X1.45X0.7 inches ￭ Accessories: cut-out sticker,3M velcro, cable tie,bolts,nuts,washer,CR2032 Battery,TS003 probe senor,user manual.