Paslode Connector Nailer,19 1/2 Width,Angled, Silver (500855)

Pay with

About Paslode Connector Nailer,19 1/2

Product Description Connector Nailer, Power Source Air Powered, Air Consumption 0.051 cfm, Air Inlet 1/4 NPT, Air Pressure 80 psi, Air Pressure Range 80 to 120 psi, Max. Air Pressure 120 psi, Min. Air Pressure 80 psi, Min. Hose Size 3/8 in, Exhaust Location Rear, Tool Brand Paslode, Series Paslode, Firing Mode Sequential, Tip Probe, Depth Control Yes, Collation Style Strip, Collation Type Adhesive, Collation Angle 30 Degrees , For Nail Head Style Offset Round, For Nail Length Range 1 1/2 in to 2 1/2 in Amazon.com The Paslode Positive Placement Metal Hardware Framing Nailer provides the most productive and accurate way to attach metal hardware. At least three times faster than hand nailing, this air-powered metal hardware nailer drives heat-treated nails from 1-1/2- to 2-1/2-inches in length. It features a hardened nose probe for accurate nail placement, safe sequential operation and a smart lever system that automatically adjusts for different nail sizes. With a new valve design for longer tool life, this framing nailer is excellent for metal framing hardware, joist hangers, wall bracing and strap ties. It comes with a 1-year warranty. From the Manufacturer The Paslode F250S-PP Positive Placement® Metal Hardware Nailer #500855 offers a productive and accurate way to fasten metal connectors. The Paslode F250S-PP Positive Placement® Metal Hardware Nailer is at least 3 times faster than hand nailing, increases productivity and pays for itself in labor savings. The hardened probe accurately locates metal hardware hole and guides the fastener as it is driven. Nails do not protrude from nose. A built-in depth of drive adjustment helps ensure that the nail is seated flush with the metal connector. The Paslode F250S-PP Positive Placement® Metal Hardware Nailer offers a Smart Lever™ system that automatically adjusts to either 1-1/2" or 2-1/2" nail length. The Paslode F250S-PP Positive Placement® fasteners are specially designed and heat-treated to create a complete system. They are recognized by the Building Code per ICC ESR 2126 Report. Use the Paslode F250S-PP Positive Placement® Metal Hardware Nailer and Brite or galvanized fasteners for: Metal Framing Hardware, Framing Anchors/Clips, Seismic/Hurricane Ties, Joist Hangers, Post Caps and Post Bases, Foundation Anchors and Holdowns, Wall Bracing and Strap Ties.