We specialize in hard to find items
All Categories
RATTMMOTOR VFD CNC Spindle Motor Kits 2.2KW 220V Water Cooled Spindle Motor Φ80mm ER20 400Hz 24000RPM+VFD Drive Inverter 3HP+Motor Mount Clamp+14pcs ER20 Collet+80W Water Pump for CNC Router
Share Tweet
*Price and Stocks may change without prior notice
*Packaging of actual item may differ from photo shown
- Electrical items MAY be 110 volts.
- 7 Day Return Policy
- All products are genuine and original
RATTMMOTOR VFD CNC Spindle Motor Kits 2.2KW 220V Features
-
【2.2KW Spindle Motor】: ①This is a 220V-2.2KW water-cooled 8A Φ 80x213mm spindle motor come with a ER20 nut and collet, and equipped with a 80mm spindle mount. Frequency is 400HZ, 0.003--0.005 accuracy and runout off is Less than 0.01mm. ②Speed of The Spindle Motor : 0-24000RPM. Because it is a high-speed spindle motor, the spindle speed must not be lower than 9000 rpm during the use of the spindle. It should be noted that the spindle motor only can rotate clockwise but not counterclockwise.
-
【2.2KW VFD Parameters】Control Model: SPWN. Power: 2.2KW. Input：1 or 3 phase 220V 0-50Hz/60Hz. Output：3 phase 220V 0-400Hz. Under normal circumstances, the parameters of the inverter have been set and can be directly connected for use. (Or please follow the instructions to set the parameters).
-
【80mm Spindle Motor Mount】Material is aluminum,surface sandblasted. Compared with the aluminium profile fixture,the accuracy is much eavier, much higher, and it is hard to deform. Fit for CNC 80mm diameter spindle motor.
-
【80W 220V Water Pump】Power:80W, Flow: 3500L/H, Hmax: 3.5M, Voltage: 220V. Also suitable for 0.8KW, 1.5KW, 2.2KW, 3KW and other high speed CNC water cooled spindle motor. Please remind that the submersible pump should be completely immersed in water when it is working to ensure that the submersible pump has a certain degree of cooling.
-
【How to Connect Spindle Motor and VFD】The spindle motor's aviation plug marked with number 1, 2, 3, 4. Number 1, 2, 3 port are connected separately with inverter's port U, V, W. Number 4 is the ground wire, no wiring is required.
-
【1 Year Warranty】We offer 1 year warranty, if you have any questions about the product, please contact the seller for a satisfactory solution.
About RATTMMOTOR VFD CNC Spindle Motor Kits 2.2KW 220V
Package Include: 1x 2.2KW ER20 water-cooled spindle motor 24000rpm 80mm 400Hz 1x 2.2KW VFD Inverter 220V input with 220V output 1x 80mm clamp cast aluminium bracket 1x 75W Water pump 220V 3.2M 1x 5M water pipes 1 Set of ER20 collet(14pcs)(1mm,2mm,3.175mm,3mm,4mm,5mm,6mm,7mm,8mm,9mm,10mm,11mm,12mm,13mm) 1. 2.2KW Water Cooled Spindle Motor ER20 Material: Stainless Steel Size:Φ 80x213mm(Middle body diameter:80mmxLength:213mm) Power: 2.2KW Voltage: 220VAC Current: 8A Frequency: 0-400Hz Speed: 0-24000rpm Accuracy: 0.003--0.005 Runout off: Less than 0.02mm Bearing Lubrication: Grease Collet Size: ER20 Bearings: 3 bearings(C7005x2 + C7002x2),P4 class, Angular contact bearings Main Application: Wood, Glass, PVC industry 2. 2.2KW Inverter VFD 220V input Tech Parameters: 1) Input Voltage: 220V(+/-15%) 2) Output Voltage 208VAC-240VAC 3) Input Frequency: 48-63 Hz 4) Output Frequency: 0-400 Hz 5) Input Phase: 1 or 3 phase 6) Output Phase: 3 phase 3. 80mm clamp cast aluminium bracket Diameter: 80mm Material: Aluminum,Cast Aluminum 4. 75W CNC spindle motor water pump 3.2m 220VAC Specification: Pump Length:3.2m Voltage:220-240VAC Power:75W Flow:3000L/H Size:150x80x140mm Application: Fit for 0.8kw,1.5kw,2.2kw,3kw,water cooled spindle even 4kw and 5.5kw too 5.ER20 spring collet: Product Description Out dia (D1):11.5mm Height (H):18mm Hole dia (D2):1-13mm Run-out Tolerance 0.1mm First class 1065 carbon steel Hardened & precision ground 6.5M Water Pipes: Length: 5M Can be connected between Water Pump and Spindle Motor How to Connect: Professional aviation Interface. Interface 1234 marked 123 respectively connected to the inverter output end of the (U, V, W), 4 ground wire this interface safe ground
