We specialize in hard to find items
All Categories
JRready ST2165 M22520/1-01 Crimp Tool Kit NEW-ASF1G Crimping Tool with Universal screw adjustment UF2-5 and PH102 M22520/1-02 Turret Head Positioner for 12-26 AWG Wire Harness
Share Tweet
*Price and Stocks may change without prior notice
*Packaging of actual item may differ from photo shown
- Electrical items MAY be 110 volts.
- 7 Day Return Policy
- All products are genuine and original
JRready ST2165 M22520/1-01 Crimp Tool Kit NEW-ASF1G Features
-
HIGH-QUALITY CRIMP:4 indent 8 impression;gives a Mil-Standard 8 impression crimp, which assures maximum tensile strength with almost every closed barrel contact
-
PROFESSIONAL CRIMPER:Designed according to MIL-C-22520/1-01;The cycle controlled precision ratchet assures consistently accurate crimps every time
-
8 POSITION SELECTOR KNOB:Allows operators to control the crimp depth conveniently,selector number 1-8 corresponds to wire 26-12 AWG, please remove the locking pin carefully before using
-
NEW HANDLE DESIGN:Special wave shaped rubber grips, comfortable hand feeling and not easy to slide off
-
TOOL KIT:Includes 1 NEW-ASF1G crimping tool, 1 PH102 turret head, UF2-5 Universal screw adjustment positioner and 1 mini hex wrench;crimper compatible with most M22520/1 series TH turret heads and TP positioners
About JRready ST2165 M22520/1-01 Crimp Tool Kit NEW-ASF1G
JRready M22520/1-01 Crimp Tool Kit JST1026,JRD-AF8 Crimping Tool with TH1A Turret Headl JRD-AF8 Crimping Tool 1.Has limitless application within the specified wire range of 12-26 AWG 2.Positioners adapt the tool frame to specific mil contacts or proprietary contact combination 3.The JRD-AF8 gives an 8 impression crimp, which assures maximum tensile strength 4.Crimp depth can be adjusted by an 8 position selector knob conveniently located on the tool frame 5.The precision ratchet controls cycling of the tool in both directions of handle movement which assures the same accurate crimp every time TH1A Turret Head 1. Designed with reference to US military standard M22520 / 1-02; How to Use It 1. Keep the Crimp tool open. 2. Press the clamping block to adjust the sleeve and place it in the guide position. 3. Install the positioner on the retaining ring and connect the screws and threads together. 4. After the positioner is fixed, tighten the screws. 5. Refer to the data plate of the positioner. From the color code column, select the registration color that corresponds to the appropriate part number and contact size. 6. At the tool and turret positions in the open position, rotate the color-coded locator to match the index mark. Press the sleeve until the position is fixed. SPECIFICATIONS: ● Material: Mould Steel ● AWG: 12-26AWG(0.128-3.33mm²) ● Crimper Through-hole Diameter: Φ5.6mm ● Dimensions(mm): 282*89*86 ● Weight(g):550.6(Crimper)+110(Positioner)
