We specialize in hard to find items
All Categories
GOORIDA 220V 240V/3KW Spa Hot Tub Thermostat, Inflatable Pool Thermostat with Adjustable Temperature Fits for Bathtub, Above Ground Pools, Water Thermostat Replacement Parts
Share Tweet
*Price and Stocks may change without prior notice
*Packaging of actual item may differ from photo shown
- Electrical items MAY be 110 volts.
- 7 Day Return Policy
- All products are genuine and original
- Cash On Delivery/Cash Upon Pickup Available
GOORIDA 220V 240V/3KW Spa Hot Tub Features
-
Item No. H30-RS1, comes with 1-PC 220-240V/50-60Hz, 3000W, hot tub thermostat, 2-PCS tube connectors (The tube is not included, you need to prepare an extra 1.5” hoses), suitable for a bathub with 340 gallons, up to 600 gallons.
-
Make sure the direction of the water flow is correct, otherwise it will not work. Minimum working pressure 0.035MPa. we recommended to use at least 0.25HP/200W (1500GPH) pump to work well. The required heating time varies according to the environment and water temperature, so it is recommended to fill the bathtub with hot water instead of cold water to reduce the heating time(better with an insulation cover).
-
By adjusting the temperature button, the thermostat can keep the water temperature between 0℃ and 45℃ (32ºF~113ºF), this thermostat turns on and off automatically according to the temperature you set. If temperature exceed 60℃(139ºF), reset button will flick out and cut off the power, needing manual reset.
-
Reminder: Make sure you have 220-240 volts before purchasing this product.
-
Very cost effective solution：If you want an easy and affordable thermostat for your Jacuzzi tub or even if you want to make your own. As long as you follow instructions this is a 1-hour maximum install.
-
1 Year Warranty and for whatever reason, you are not satisfied, you can request a replacement or a full refund. If you have any questions, please do not hesitate to contact us. 7*24.
About GOORIDA 220V 240V/3KW Spa Hot Tub
Important Notes: 1.It is advisable to have this device installed by authorized or professional personnel, as 99% of thermostat malfunctions result from incorrect installation. 2.Installation of this thermostat requires the preparation of a 20A adapter or circuit breaker, the correct voltage of 110-120V, and proper wiring. 3.Use 1.5-inch pipes; smaller pipes may not guarantee sufficient water flow. Additionally, use a water pump with a rating of 0.25HP/200W or a flow rate of 3600 liters per hour or higher to ensure it can activate the water flow switch inside the device for the thermostat to function. (Insufficient flow will prevent the thermostat from working, so extra attention is needed.) 4.Proper installation orientation is crucial; the direction of water flow should match the direction indicated by the arrow on the device (the arrow direction indicates the inlet and outlet). The thermostat will only work when installed correctly. (Incorrect installation orientation will prevent the thermostat from functioning.) 5.Adjust the outlet water temperature to a high setting; the thermostat will only operate when the water temperature is higher than the set outlet temperature. When the water temperature exceeds the set temperature, the device will automatically stop working. The adjustment range is from 32ºF to 113ºF (0-45℃). When the hot water exceeds 139ºF (60℃), the reset button will automatically pop out and cut off the power. (To reactivate the device, you need to unscrew the cap next to the adjustment knob and press the reset button.) 6.The primary function of this device is to maintain the temperature of the hot tub, so please fill the hot tub with hot water rather than cold water. It is recommended to use an insulating cover to maintain the water temperature. 7.The recommended hot tub capacity is 200 gallons, with a maximum of up to 400 gallons under suitable insulation conditions.
