All Categories
⚙️【3/4HP HIGH EFFICIENCY】Equipped with a 3/4HP powerful motor, the capacity of transferring water can be Max. 3600 GPH with 1.5" discharge hose horizontally. Pump has the ability to lift water up to Max. 27 ft vertical, 2500 gallons per hour on at 10 ft discharge lift. This sump pump works with clean and dirty water which contains solid less than 1.4".
⚙️【FULL STAINLESS STEEL CASING】Assembled by integrated 304 stainless steel housing and pump base with better cooling ability for long life. Pump also comes with a 26.2 ft long cable cord, which allows the pump to go deep enough (23 ft) in the water. This pump can be used in a Min 16"x16" pit.
⚙️【SAFETY ENSURE & DURABLE】Upgraded Sealing Structure gives pump longer life time, which is much longer than regular mechanical seal. Full corrosion-resistant shell and thermal protection ensures the pump will not be burned out, even when the pump triggers the thermal overload protector, the pump will rework after cooling down.
⚙️【AUTOMATIC OPERATION】The pump ON/OFF is controlled by float switch. Once the water pump is plugged in, it will automatically start when the water level is above 15-20", and stop working when reaching the stop-level of 6". When you start to use this pump, tilt and submerge the pump into water for a few seconds to expel the air inside of the pump.
⚙️【MANUAL OPERATION】For the customers who don't like to use the float switch, you can just simply attach it on its side slot, so that the pump becomes manually controlled. This can be used when water level is low and not enough for floater freely floating in the water. Pump can remove water down to 2", and it will keep continuously running and will not turn off automatically, so remember to cut off the power immediately to prevent the motor becoming burned!
⚙️【EASY TO INSTALL】Comes with three plastic adapters: GHT 3/4", NPT 1" and 1.5" male tread connectors. GHT 3/4"+NPT 1" connects standard garden hose for quick installation. 1.5" male thread connects discharge hose for maximum output flow rate, this adapter has three different diameter outlets (Diameter 1 inch ,1-1/4 inch, 1-1/2 inch) to adapt for different size hoses as needed. The bigger the flow is, the wider the outlet should be.
⚙️【BUY WITH CONFIDENCE】This pump is designed for multi applications and emergency use, like flooding basement, garden pond, hot tub, and so on. Provide lifelong technical consultation and 24h customer service. One-year manufacturer's warranty.
Specifications:►Clean/Dirty submersible water pump with float switch►Powerful 3/4 HP, copper winding motor, upgraded Seal Structure►Stainless case and durable PP plastic base►Thermal Overload Protection prevents motor burn because of dry running or impeller block►Maximum flow rate up to 3300GPH and Maximum lift water up to 26 feet►Removes water down to 2 inch►Float and flat base can allows for pit installation and automatic operation Included in this Package:►Pump (operating with 110V~120V)►Instruction Manual►Adapter fits discharge hose size 1", 1-1/4", and 1-1/2" by using clamp to fix hose►After dis-assembled top outlet, its elbow has male thread G1.5" and can be connected with bigger hose Ideal for:►It can be used to quickly remove water from pools, ponds, water tank and other large bodies of water ►Irrigating Garden►Draining flood from cellars or basements►Powering waterfalls or fountains►Transferring water from unwanted place Tips:►If you want the flow be bigger, the height of the water that you pump out should be lower, and using the 1.5inch discharge port. The bigger the flow is, the wider the outlet should be ►Before starting, tilt the pump to remove all air and wait for 15 seconds►If the water level is not enough height for float switch freely floating, you can use float buckle mode, pump can still work, which means manual operation About FLUENT TOOLS was founded in 2008 with the goal of creating user-friendly and energy saving products. We are professional manufacturer of garden water pump. Our customers include Tool retailer companies, supermarket, and DIY stores