Studor 20395 Trap-Vent Integrated Trap and Air Admittance Valve, 1-1/4-Inch Connection

Pay with

Studor 20395 Trap-Vent Integrated Trap and Air Features

• Trap-Vent combination design includes a 2-inch water seal and an integrated AAV (air admittance valve); fits 1-1/4-inch piping

• Ideal plumbing solution for remodels, restorations, and floating sinks; replaces conventional P-traps and reduces the need for secondary ventilation; capacity of 6 DFUs (drain fixture units)

• One-way valve allows air into drainage system when negative (suction) pressure occurs, protecting the integrity of trap seal

• Prevents leakage of sewer gas

• Provides a clean, modern appearance

About Studor 20395 Trap-Vent Integrated Trap And Air

The compact Studor Trap-Vent is a combined trap with a 2" water seal and an integrated air admittance valve, reducing the need for secondary ventilating and replacing conventional P-traps. The valve within the Trap-Vent opens and admits fresh air when the negative (suction) pressure occurs from a fixture discharging into the system. This equalizes the pressure within the system and protects the trap seal. When the flow stops, the valve closes by gravity, preventing any transmission of sewer gas. The Trap-Vent is the ideal plumbing solution for remodels, restorations and floating sinks. Trap-Vent is for use on a lavatory, water cooler or sinks that do not receive a discharge from any appliance. Trap-Vent is rated up to 6 DFUs on a horizontal wet vent. The Trap-Vent cannot be installed on kitchen sinks, laundry tubs, or a sink that receives discharge from any kind of appliance. Do not use where pumps or pressurized flushing devices are used. Please follow all instructions carefully during installation. Fits: 1-1/4-inch x 1.75-inch vent diameter. UV stabilized ABS construction with a temperature rating of 32 - 150 deg F. Dimensions: 4.0625-inch width x 5.0625-inch height.