We specialize in hard to find items
All Categories
YUCHENGTECH Mud Hydrometer Mud Tester Slurry Test Kit Sand Content Kit Mud Tester Viscosimeter Sand Content Meter (Kit)
Share Tweet
*Price and Stocks may change without prior notice
*Packaging of actual item may differ from photo shown
- Electrical items MAY be 110 volts.
- 7 Day Return Policy
- All products are genuine and original
YUCHENGTECH Mud Hydrometer Mud Tester Slurry Test Features
-
1. Contained items: This kit is a three piece mud set, including NB-1 Mud Hydrometer, 1006 mud viscometer and NA-1 sand content meter. The kit can be used for laboratory measurements of viscosity, specific gravity / density and sand content.
-
2. NB-1 Mud Hydrometer: NB-1 Mud Hydrometer is used to measure the weight of mud, the unit is g / mm3, measurement range:0.96-3 g / cm3, measurement accuracy:0.01 g / cm3, the mud cup capacity:140 cm3.
-
3.1006 Mud Viscometer: Mud viscometer is suitable for measuring the viscosity of mud in well sites and laboratories. It is calculated by the time required for 500mm3 mud to flow out of the viscometer, in seconds.
-
4.NA-1 sand content meter: Sand content meter is determined by the change of mud volume after filtration through screen, expressed as a percentage.
-
5. Features: The mud test kit is a portable kit, and all three test instruments are packed in an aluminum suitcase. Strong and durable, compact structure, easy to carry and store.
About YUCHENGTECH Mud Hydrometer Mud Tester Slurry Test
NB-1 Mud Hydrometer Operating procedures： 1. Pour the mud into the mud cup, level the cup mouth, and do not leave bubbles. Cover the cup cover gently. The excess mud and air will be discharged from the small hole in the middle of the cup cover, and then wipe up the spilled mud 2. Then put the main blade of the lever on the main blade pad of the base and move the heavy object slowly. When the bubble is in the middle, the lever remains level, and the scale on the left side of the farmma is the mud specific gravity 3. When measure the mud weight in the range of 2-3 g / cm3, the balance cylinder cover shall be unscrewed, and then the counterweight shall be put in and the screw cap shall be screwed on NA-1 mud sand content tester Operating procedures： 1. Fill the mud to the mark of "mud" on the measuring pipe, add water to the line with "water", block the pipe orifice and shake it 2. Pour the mixture into the filter cylinder, throw the liquid passing through the filter screen, add water into the measuring tube, shake and then pour it into the filter cylinder, and repeat until the measuring tube is clean 3. Wash the sand on the screen with clean water to remove the residual mud 4. Put the funnel into the filter cartridge, turn it over slowly, and insert the funnel into the measuring tube. Wash all the sand attached to the screen into the pipe with clean water 5. Read out the percentage of sand after the sand has settled 6. Clean and dry the instrument and put it into the box Main technical parameter: Calibration on the measuring tube: 0.5% per cell below 15%, 1% per cell between 15% and 30%, and 5% per cell between 31% and 100%. Mud viscometer Main technical parameter: The material of mud viscometer:iron Outflow pipe hole diameter: 5mm, length :100mm Water value: 15±0.5s The capacity of measuring cup :one 500ml,another 200ml
