All Categories
Get it between 2024-12-31 to 2025-01-07. Additional 3 business days for provincial shipping.
✔✔ 【4040 Humidifier Solenoid Valve】▶Humidifier Water Solenoid Valve 4040 controls the amount of water released into the room by the humidifier, helping you maintain the optimal indoor humidity of 35%-45%, improve air quality and create a healthy and comfortable environment. A-prilaire 600 solenoid valve turns water on and off to your humidifier but does not regulate volume which is done by a different part called an orifice. ▶And 4040 humidifier water solenoid valve is installed inside the filter, which can capture impurities in the water when the water passes through the valve.
✔✔【EXCELLENT PERFORMANCE】▶4040 Humidifier water solenoid valve replacement includes compression nut, washer and inline strainer.▶4040 solenoid valve are threaded 7/16"-24 UNS for accepting a compression fitting for ¼" tubing. Specification: 24 volts | 2.3 Watts | 60 Hz | Blue. ▶The 4040 humidifier valve is made of brass body and stainless steel seat, A-prilaire 700 valve is rigorously inspected and tested by the supplier for durability and long service life.
✔✔ 【FIT MODEL】4040 solenoid valve compatible with A-prilaire Humidifier. Replaces: B2017-S85, B2015-S85, 220, 224, 400, 400A, 400M, 440, 500, 500A, 500M, 550, 550A, 558, 560, 560A, 600, 600A, 600M, 700, 700A, 700M, 760, and 768.【Does not work on models 330, 445, 110, 112, 350 and 360】If you are not sure whether our the 24 volt solenoid for humidifier water solenoid valve fits your humidifier, please feel free to contact us to help you check.
✔✔【365 DAYS GUARANTEE】During the 365 days warranty period, if the A-prilaire 4040 solenoid valve has quality problem or other reasons, we support return, replacement or refund. Customer satisfaction is our unremitting pursuit. If you are not satisfied with the product, please contact us immediately.
✔✔【 EASY TO INSTALL 】Disconnect the humidifier and cut off the water supply before performing any repairs. Replace 4040 humidifier solenoid valve, you only need to prepare a screwdriver and wrench. Installation is simple and takes no more than 10 minutes.First remove the solenoid, loosen the wire on the solenoid, unscrew the compression nut with an adjustable wrench, then remove the distributor and tube, replace the new screw tube, distributor tube, tighten the compression nut, and finally connect the wire to the solenoid. ▶During installation, align the solenoid and tighten the screws and compression nuts to avoid leakage or falling off.