GDAE10 Water Transfer Pump,1" Inch 38cc 4-Stroke Portable Gasoline Engine Water Pumps,1.2kw, 8500r/min

Pay with

GDAE10 Water Transfer Pump,1" Inch 38cc 4-Stroke Features

• 【MAIN PARAMETERS】Engine model: 140F-3;Engine type: single-cylinder, air-cooled,four-stroke gasoline engine;Engine displacement: 38cc;Maximum power and speed: 1.2kw, 8500r/min;Product size: 36*28*32cm/14.17*11.02*12.60in.

• 【PREMIUM PERFORMANCE】The pump's engine adopts strong 4-stroke power, cylinder strength is bigger and stronger.High speed, parallel conveying>100M.Low fuel consumption, stable performance, long service life and low failure rate.Low noise, low emissions and no pollution.

• 【HIGH QUALITY MATERIAL】The lightweight and durable steel frame along with this unit’s compact design make it convenient to store your pump until the next time you need it.Adopt high quality and compression resistance Pull recoil start system.

• 【WIDE APPLICATION】WP10-140F portable four-stroke gasoline engine water pump is suitable for garden lawn watering, field pumping, drainage operations, clothing crops, green seedlings, irrigation and fertilization, etc.

• 【CUSTOMER SERVICE】if you have any questions.We will provide the best suitable solutions for you.We are committed to provide best service for every customer!

About GDAE10 Water Transfer Pump,1" Inch 38cc 4-Stroke

Product parameters: Model: WP 10-140F Engine model: 140F-3 Engine type: single-cylinder, air-cooled,four-stroke gasoline engine. Engine displacement: 38cc Maximum power and speed: 1.2kw, 8500r/min Fuel tank volume: 650ml Engine oil tank volume: 80ml Maximum suction range: 7m Maximum lift: 30m Suitable water pipe size:Water pump inlet: 1” (25mm) Pump outlet: 1” (25mm) Flow rate: 8000L/hour Gross/net weight: 10kg/8.2kg Packing size: 38x35x30cm/14.96*11.81*13.78in Product size: 36*28*32cm/14.17*11.02*12.60in Start mode: pull start Use and maintenance: 1. First use: Choose genuine four-stroke gasoline engine oil and add it to the engine oil tank, about 80ml. Replace it every 100 working hours in the future. 2. Fill the fuel tank and engine oil tank with gasoline and engine oil respectively. Turn on the oil circuit switch, 3. Open the water filling cover above the water pump. Fill up the water diversion, use the card link to connect the water inlet pipe (note that all connections of the water inlet pipe cannot leak. Air leakage will cause the water to be unable to absorb). 4. Close the damper and pull the starter. After starting, open the throttle and increase the throttle to start working. (If there are signs of starting but failed to start, please open the damper and continue to pull the starter) 5. Good use and maintenance habits. It will make your machine work more efficiently. Note: After each work, run at idle speed for 2-3 minutes, and turn off the engine after the engine temperature drops to increase the service life. packing list: 1x water transfer pump Hose clamps and accessories English user manual