DamIt Dam Sealer 1L

Pay with

About DamIt Dam Sealer 1L

DamIt is an advanced, non-toxic, polymer powder which can be used to seal leaking dams and ponds. The polymer is applied to a leaking dam or pond by scattering the powder across the surface of the water. DamIt is designed with a positive charge which draws it downward through the water toward the bottom of the dam or pond. The water pressure (hydrostatic pressure), which causes the dam or pond to leak, forces DamIt down into cracks and crevices as it sinks to the bottom of the pond or dam. Once activated with water, DamIt will expand in size and bind to other particles to form larger clumps, which effectively slows and stops the leak. DamIt will continue to expand over a number of hours and forms a flexible plug that withstands water pressure. DamIt is insoluble and will form a long term plug in cracks and porous soils. DamIt stays active when wet and can withstand continuous wet/dry cycles to accommodate rising and falling water levels due to seasonal water level variations in the dam or pond. DamIt is totally safe and approved for use with potable water and will not harm humans, fish, aquatic plants or animals. DamIt will eventually break down to form a harmless mix of water, potassium salts and carbon dioxide over time. DamIt does not damage aquatic plants or animals however it is suggested plants are removed prior to application for best results and introduced after the leak has been plugged. One application of DamIt is normally sufficient to stop leaks permanently. A 1L Bottle of DamIt will provide coverage to a area of 10m2 or 108 square ft. *Please note that DamIt is not tested or designed for use on concrete ponds or ponds with liners.