We specialize in hard to find items
All Categories
Technicqll Clear Adhesive Glue for Pp Polypropylene, Pe Polyethylene, PTFE, Silicone
Share Tweet
of brand new stock?
or
Need this item ASAP?
Check if this is available on Amazon
or available in other sites
Send us the link so we can buy for you
Technicqll Clear Adhesive Glue for Pp Features
-
1 x ADHESIVE GLUE FOR Polypropylene, Polyethylene, PTFE, Silicone etc (8ml+8g)
-
CLEAR / COLOURLESS HIGH QUALITY SPECIALISTIC PRODUCT
-
A specialistic adhesive with a ground agent called BASE PRIMER increasing surface energy of plastics
-
difficult to stick such as: PP (Polypropylene), PE (Polyethylene), PTFE.
-
It bonds to polyethylene and polypropylene, hot formed elastomers, silicone and related plastics.
About Technicqll Clear Adhesive Glue For Pp
A specialistic adhesive with a ground agent called BASE PRIMER increasing surface energy of plastics difficult to stick such as: PP (Polypropylene), PE (Polyethylene), PTFE. This colourless, curing in seconds and close to ideal of the 21st century adhesive is used for strong and durable bonding of all materials having surfaces smooth and porous, stiff and elastic as well as material combinations e.g. PE to steel, PP to stone. It bonds to polyethylene and polypropylene, hot formed elastomers, silicone and related plastics. May be also used for bonding PTFE plastics to all other materials e.g. PE to glass or stone or PVC etc.In the production of the adhesive the latest achievement of supermolecular chemical engineering has been used up. Applying a new generation adhesive allows for obtaining excellent strength parameters and the highest adhesion to polyolefins (PE, PP) coated previous with the base primer. HOW TO USE: Clean and degrease thoroughly the surface to be bonded before applying the base primer. Thanks to a brush added to every bottle of the base primer this agent is applied equally and thoroughly to the surfaces. It is recommended to coat with the primer twice or three times in case of porous and irregular surfaces. The base primer is to be applied only to PP, PE and PTFE surfaces. A minute after applying it the adhesive may be applied to one of the surfaces to be bonded. The antiadhesive hair of the brush allows for application a very thin layer of the adhesive (even 0,15mm). Such a micron film gives a joint of the highest parameters with an equal distribution of adhesion forces during breaking stresses. Please note: You must not to apply the base primer to surfaces which are easy to stick (e.g. PVC) because you obtain the opposite effect from what you intended. The adhesive should be used only for one of the surfaces to be bonded.
