All Categories
Get it between 2025-01-02 to 2025-01-09. Additional 3 business days for provincial shipping.
THIS 50+5 MFD CAPACITOR is 3 15/16”" TALL by 2 5/16" WIDE - Measure Old Capacitor for Correct Fit
DESIGNED TO LAST 60,000 HOURS - Built to EIA-456-A and IEC 60252 Standards
DUAL CAPACITOR will run both a COMPRESSOR and FAN and WORKS WITH 370 or 440 VOLTS
ENGINEERED FOR SAFETY - 10,000 AFC Anti-Explosion Pressure Switch and No PBA's Used In This Product
EASY REPLACEMENT! Turn off the Power, Mark the Wires, Move the Wires to new Capacitor, Replace Capacitor and turn on Power.
THIS 50+5 MFD CAPACITOR is 3 15/16”" TALL by 2 5/16" WIDE - Measure Old Capacitor for Correct Fit - Please check all specifications carefully. It is designed for 440 Volts which means it will work at 370 or 440 VAC and will run from -40 C. to +70 C. It is safety rated at 10,000 AFC. A dual run capacitor, such as this 50/5, combines two capacitors into one unit. It will power a compressor motor and a fan motor, and has three terminals on the top. They are labeled "Herm" for the compressor motor, "Fan" for the fan, and "C" for the common line. Run Capacitors work hand in hand with Electric Motors that power the compressors and condensers that make air conditioning work. For this purpose, the Capacitor works the same way as a battery. It stores and releases a large charge very quickly. This released charge gives the motor the spin it needs to start and run correctly. As Air Conditioning Capacitors age, they lose their ability to hold a charge and get weaker. As the capacitor gets older, the motor may get louder and seem to run slower. If replaced before they get weaker, its possible to lengthen the life of the motor. Eventually, the capacitor will get too weak to start the motor and if the motor can't start, it can short out. Timely replacement of the capacitor is essential to Air Conditioning Maintenance. SAFETY TIPS FOR REPLACEMENT When replacing a capacitor always be sure to turn off the power to the air conditioning unit and place a screw driver between the terminals of the capacitor to release any stored charge. MaxRun Capacitors are designed to be the correct fit, but it's best to measure the height and width of the capacitor to double check that the replacement unit matches the original. We also recommend keeping a spare so you have one handy when it's needed.