X
uxcell Nitrile Rubber O-Rings 7mm OD 3mm ID 2mm
uxcell Nitrile Rubber O-Rings 7mm OD 3mm ID 2mm
uxcell Nitrile Rubber O-Rings 7mm OD 3mm ID 2mm
uxcell Nitrile Rubber O-Rings 7mm OD 3mm ID 2mm
uxcell Nitrile Rubber O-Rings 7mm OD 3mm ID 2mm
uxcell Nitrile Rubber O-Rings 7mm OD 3mm ID 2mm

uxcell Nitrile Rubber O-Rings 7mm OD 3mm ID 2mm Width, Metric Sealing Gasket, Pack of 200

Product ID : 48630195


Galleon Product ID 48630195
Shipping Weight 0.05 lbs
I think this is wrong?
Model A18071800ux0176
Manufacturer Uxcell
Shipping Dimension 5.51 x 3.7 x 0.59 inches
I think this is wrong?
-
No price yet.
Price not yet available.

Pay with

uxcell Nitrile Rubber O-Rings 7mm OD 3mm ID 2mm Features

  • [Size] - 7mm Outside Diameter, 3mm Inner Diameter, 2mm Cross-Section Diameter

  • [Hardness] - 70A Durometer (Shore Hardness) for resistance to penetration

  • [Nitrile Rubber] - Standard Nitrile Butadiene Rubber with a wide temperature range from -4℉ (-20°C) to 212℉ (100°C)

  • [Application] - Widely used for pressure washer, filter, pump, water hose, plumbing pipe, maintenance and much more

  • [NOTE] - Please confirm the required size and material before purchase, and put it in the right place


About Uxcell Nitrile Rubber O-Rings 7mm OD 3mm ID 2mm

Description:1.They are circular in shape, round in cross-section. For use across a wide temperature range from -30 degrees F (-34 degrees C) to 250 degrees F (121 degrees C).2.Buna N or Nitrile has good mechanical properties when compared with other elastomers and high wear resistance. Good resistance to many petroleum oils, greases, hydraulic fluids, alcohol, mineral oil and grease.3.This O-ring is made of black nitrile rubber, has a durometer of 50A, and is designed for use in a wide variety of sealing applications.4.O-rings commonly provide a pressure and fluid seal between cylindrically shaped, overlapping mating surfaces and are commonly seen in engines, faucets, flanges, valves, and various cylinders.5.Buna-nitrile is vulnerable to acetone, ethers, esters, ozone, sunlight and weathering and should therefore not be used in ozone-generating electric motors, welding equipment, or in applications with exposure to UV light.Specifications:Outside Diameter: 7mm / 0.28-inchInner Diameter: 3mm / 0.12-inchCross-Section Diameter: 2mm / 0.08-inchPackage Content: 200pcs x O-Ring