We specialize in hard to find items
All Categories
VPFET HDMI Extender Over Single Cat5e/6 HDMI Over Ethernet Up to 200Ft Repeater Balun Transmitter Receiver Power On Cat Support Full 1080p 3D HDCP EDID Copy from Displays
Share Tweet
*Price and Stocks may change without prior notice
*Packaging of actual item may differ from photo shown
- Electrical items MAY be 110 volts.
- 7 Day Return Policy
- All products are genuine and original
- Cash On Delivery/Cash Upon Pickup Available
VPFET HDMI Extender Over Single Cat5e/6 HDMI Over Features
-
【HDMI extender over cat5e/6】The HDMI extender can simultaneously transmit high resolution video and audio through an oxygen-free copper CAT6 cable, up to 200 feet, no delay, audio and video synchronization,outdoor or indoor, Good choice for projects and video conferences.
-
【EDID management】The 200ft HDMI Extender support EDID management,can copy the EDID content of the monitor and store it on the sender side to enhance compatibility and perfection.
-
【POC technology】Plug and play, the HDMI over ethernet no need to install drivers and software,One power supply for normal operation,just need to use the power adapter on TX , and Rx can work through the cat6 transmission power supply. Low to 5V voltage transmission, safe and reliable. Note: only one power supply is required
-
【HDMI Lossless Transmission】the HDMI over ethernet has built-in automatic adjustment system and ESD protection system , the picture is smooth, clear and stable.Ensure crystal clear & distortion-Free & no latency, we recommend to use oxygen free copper Cat 6 cable; Support audio format: DTS-HD/Dolby-true HD/DTS/Dolby-AC3/DSD.Support video format:1080p/1080i/720p/576i/480p.
-
【HDMI extender Strong compatibility】No quality loss,easy installation. the HDMI extender can be widely used in PCs, DVD players, PS3, PS4, HD Box, Satellite Box, Android Box, etc. so the HDMI over cat5e is an ideal choice for digital signage, churches, classrooms,conference rooms, conference room projectors,games,video production, etc.
About VPFET HDMI Extender Over Single Cat5e/6 HDMI Over
The HDMI extender can use a CAT6 cable to transmit the HDMI signal to a display no more than 200ft. Notes: The HDMI extender must use oxygen free copper CAT5e/6/7 The extender transmits 1920x1200@60Hz HDMI signal, the longest distance can only reach 175ft. EDID copy: Copying the EDID operation to the HDMI extender will transmit the best video and audio signals. It is recommended that you try this. Steps: 1. Connect the TX and the monitor with an HDMI cable. 2. Connect the power and press the EDID button. 3. The indicator will flash 3 times. 4. After 3 seconds, the operation is completed and will be permanently remembered, unless the TX is EDID again set operation. (Sender is connected to the power supply, press and hold the EDID button for 3 seconds, the signal indicator lights up, and then turns off, which means to restore the factory settings) Instructions: 1.Connect one HDMI cable(AWG 26) up to 16ft between source device and TX Extender 2.Connect one HDMI cable(AWG 26) up to 16ft between display device and RX Extender 3.Connect single Cat6 cables up to 200ft instead of HDMI cable between TX and RX Extender 4.Connect 5V power supply,Using POC technology, only need to use the power supply at TX , and Rx can work through the network cable transmission power supply. Low to 5V voltage transmission, safe and reliable. Specification: Support resolution:3D/1080p/1080i/720p/576p/576i/480p/480i/Up to 1920x1200@60Hz Support audio format: DTS-HD/Dolby-trueHD/DTS/Dolby-AC3/DSD Max transmission bandwidth: 1.65Gbps Input/Output HDMI cable distance:16ft(5m) AWG26 HDMI standard cable Power adapter format: Input:AC (50HZ, 60HZ) 100V-240V Output:DC5V Packing list: 1. HDMI TX x 1 2. HDMI RX x 1 3. 5V DC power supply x 1 4. User's Manual
