ElectrifyRC Finch 3.3GHz V2 Transmitter with Pigtail

Pay with

About ElectrifyRC Finch 3.3GHz V2 Transmitter With Pigtail

In oppose to the well-known lack of performance offered by the 5.8 GHz, the 3.3 GHz system beautifully penetrates obstacles like no other 5.8 GHz can consequently minimizing the undesirable video drops and loss of video to insignificant levels. Technically speaking the 3.3 GHz band, gives the Finch twice the range in comparison to 5.8 GHz transmitters at the same power level. Operating Voltage: 9-16V DC Current Max Consumption @12V: 90mA/240mA Output Power: 50/200mW (+/- 1dB) Camera Voltage: 12 volts (Onboard clean switching regulator) Nominal output impedance: 50 ohms Video input voltage 75-ohm impedance: Audio input voltage 10k ohm impedance: Operation temperature: -10 to 40 degrees Celsius Storage temperature: -40 to 80 degrees Celsius Operating humidity: 20 to 80% Storage humidity: 10 to 80% Dimensions in mm: 41.6(H) x 24.3(W) Frequency separation:allows for flying multiple pilots to use it simultaneously. Antenna connector: SMA female Weight: 0.3oz (8.5g) (without antenna) (**) This transmitter is US version and only channels CH3 3370 MHz and CH7 3470 MHz are available to comply with FCC rules. Frequency list. Band A CH1: 3320 MHz CH2: 3345 MHz CH3: 3370 MHz ** CH4: 3395 MHz CH5: 3420 MHz CH6: 3440 MHz CH7: 3470 MHz ** CH8: 3495 MHz