We specialize in hard to find items
All Categories
Injection Packer 50Pcs Bag 3/8"Dia X 4"Length, for Crack Repair, Concrete Restore, Waterproof, epoxy and Polyurethane, Low Pressure Opening (Silver, 3/8"D x 4"L)
Share Tweet
*Price and Stocks may change without prior notice
*Packaging of actual item may differ from photo shown
- Electrical items MAY be 110 volts.
- 7 Day Return Policy
- All products are genuine and original
- Cash On Delivery/Cash Upon Pickup Available
Injection Packer 50Pcs Bag 3/8"Dia X 4"Length, for Features
-
3/8Dia smaller hole easier displace and after work of injection. Hand quality inspection because too small diameter cannot put on automatic machine checking, expensiver but portable and less labor than bigger packers. Same depths reach by injection pumps, best with Adoration Injectoin Pumps.
-
deep reach epoxy/urthane can reach, suitable for any 2 cut or 4 cut drill bit 3/8dia inch, 4 to12inch depth holes, depending on thickness of the concrete.
-
Suitable for low and medium injection
-
Suitable 16/5 socket T-wrench dispense and removal. , best with Adoration packer ports B0D8GRV9LG.
-
Hand inspection because too small diameter, expensiver but portable and less labor than bigger packers. Same depths reach by injection pumps, best with Adoration Injectoin Pumps.
About Injection Packer 50Pcs Bag 3/8"Dia X 4"Length, For
Zerk Injection Packer 3/8inch diameter 4inch Length 100pcs Injection method statement 1.Identify the crack. 2.Drill the hole 5 to 10 cm away from the crack at 45 toward the crack. 3.Clean the hole properly. 4.Insert the packer. 5.Fix and tight the packer. 6.Connect the pump to the packer and start injecting. 7.After injection material is totally dry remove the packer. You have decided on the grout and got the right pump. Now you move on to step three: Which packers or ports will you decide? Is more expensive always better？Zerk Injection Packer/Bottom Injection Packer/ Plastic Surface Packer which is your choice for today's crack? Well, it all depends. The injection method and the selected material will help you to determine the Packer Selection. Are your cracks actively leaking, are they dry, do you use epoxy or do you inject polyurethane, or Acrylic liquid? How much pressure will be used? how do you connect your grout line?There are two primary categories of packers available. Insertable packers (mechanical packers) and surface mountedports. Mechanical packers are typically used for polyurethane injection and high pressure epoxy injection, Acrylic Injection. Since they are not glued to the surface, they work well in wet areas and with decayed 'problem' concrete. Mechanical packers come with zerk fittings and button heads (slide fittings). The zerk type is more commonly used and is less costly. It easily connects and disconnects and works nicely with medium to high injection pressures. The button head type can be of advantage in high volume applications and it offers a superior connection which is helpful for single operator injection and large applications. A plastic surface packer is widely used for ground dry crack repair Injection pressure is the keyword. Adoration Inc. Supply all above packers welcome asking us for products recommendation, check us for detail.
