Liquid Rubber Waterproof Sealant - Multi-Surface Leak Repair Indoor and Outdoor Coating, Water-Based, Easy to Apply, Kit Includes- Waterproof Sealant 5 Gallon, Caulk 10.2 oz 4 Pack, Seam Tape 4"x50'

Pay with

Liquid Rubber Waterproof Sealant - Multi-Surface Features

• PROTECTIVE FINISH FOR - Flat roofs, metal roofs, sloped roofs, planter boxes, foundations, sheds, basements, metal, wood, concrete and more. KIT INCLUDES: One 5 Gallon of Waterproof Sealant, One 4 pack of 10.2 Ounce Caulk, and One Roll of 4"x50' Seam Tape

• HIGHLY FLEXIBLE & DURABLE - Final membrane has over 1000% elongation preventing adhesion failure, and is UV Stable stopping the sun from degrading the product

• COVERAGE - Vertical Surfaces - 1 gallon/30 sq ft (2.8 sq m). 3-4 heavy coats to achieve a 30 mil (0.76 mm) membrane. Flat/Ponding Surfaces - 1 gallon/15 sq ft (1.4 sq m). 4-5 heavy coats to achieve a 60-80 mil (1.5-2 mm) membrane

• ENVIRONMENTALLY FRIENDLY - Liquid Rubber Waterproof Sealant/Coating is water based, containing no solvents, VOC's or harmful odors. Safe for humans and pets alike, can be used indoors and outdoors with no special breathing apparatus

• FOR A BULLETPROOF SYSTEM - Bridge joints, seams, vents, gaps, protrusions…. With Liquid Rubber Seam Tape or Liquid Rubber Geo-Textile where possible movement may occur

• FULL KIT RETURNS ONLY - To streamline the process and for the best buying experience, we only accept Full Kit returns for this product

About Liquid Rubber Waterproof Sealant - Multi-Surface

KIT INCLUDES: One 5 Gallon of Waterproof Sealant, One 4 Pack of 10.2 Ounce Caulk, and One Roll of 4"x50' Seam Tape. Liquid Rubber Waterproof Sealant is an environmentally friendly coating that is easily brushed on and cures into a waterproof membrane. It can be used in many applications where you need to create a watertight seal. Flat Roofs, Metal Roofs, Sloped Roofs, Planter Boxes, Foundations, Sheds, Basements, Metal, Wood, Concrete and more. Use Liquid Rubber Seam Tape or Liquid Rubber Geo-Textile to bridge seams, joints, vents, protrusions to create a long lasting repair or rejuvenation. Apply when temperature is above 40F/5C. Apply to a clean, dry surface, free of anything that would hinder adhesion. Typically cures within 24-48 hrs. Do not freeze. Store in a warm area. Do not apply in wet conditions or if rain is forcasted within 24 hrs. Not meant as a constant walking surface. Coverage - Vertical Surfaces - Apply a minimum final thickness of 1 gallon/30 sq ft (2.8 sq m). It should require around 3-4 heavy coats to achieve a 30 mil (0.76mm) (DFT) membrane. Flat/Ponding Surface - Apply a minimum final thickness of 1 gallon/15 sq ft (1.4 sq m). It should require around 4-5 heavy coats to achieve a 60-80 mil (1.5-2mm) (DFT) membrane. Apply next coat when dry to touch and nothing is wet underneath; tacky is okay. Generally 12-24 hrs between heavy coats. Amounts vary depending on surface roughness. Use all material up to achieve a long lasting membrane. Avoid hot, direct, intense sunlight during application. Remove Painters Tape while still wet. Membrane will turn brown in ponding situations due to surfactants. Will dissipate over time as the water cycles and cleans. Clean Up - Use soap and water or mineral oil to clean skin.