All Categories
【Quick Unlock】: Circuit connection in drawer, quick unlocking in 0.5 seconds, automatic pop-up. Say no to the RFID lock that is insensitive due to the thickness of the cabinet door. (Please note that the diameter of the applicable hole is not less than 15mm/0.59inch.)
【Rechargeable & Humanized Design】: The cabinet lock adopts rechargeable design, USB charging interface, convenient and easy to use. USB interface is designed under the external fingerprint, convenient for emergency charging. Low power consumption, it can last for about 180 days after fully charging.
【AI Intelligent Learning】: The fingerprint lock is embedded with AI intelligent chip and has a self-learning algorithm. The fingerprint will be compared, spliced and recorded after each fingerprint identification. It can effectively improve the recognition probability, and the more it is used, the more sensitive it is.
【 Easy to Install and Set up】: Store and recognize up to 20 fingerprint, no need of App or PC .This electronic cabinet lock offers administrator fuction, it needs to verify the administrator's fingerprint before adding the new fingerprint or deleting all fingerprints. Ensure that the fingerprint is successfully entered, otherwise anyone can unlock. Easy to install. The manual has been updated to provide more detailed use and installation information.
【Wide Application】: This cabinet locks can be used widely for Wooden cabinet, drawer, storage box, wardrobe, dresser, wine cabinet, nightstand, ect.. Say goodbye to The key! It can provide good safety protection of your personal items while protecting your privacy. It also can improve children's safety at home, avoid your children or kids free to open the drawers or cabinet doors.
Feature: 1.Keyless/Smart /Safe, Biometric Fingerprint, 20 Fingerprint can be added. 2.Rechargeable design, quick unlocking, automatic pop-up. 3.Lower Power, it can last for about 180 days after fully charging. 4.Peripheral USB emergency interface, don't worry about not being able to open the lock without power. 5.AI Intelligent Learning, the more it is used, the more sensitive it is. Add (administrator) fingerprint for the first time: (Note: The first three fingerprints are administrator fingerprints. If no fingerprints are entered, anyone can unlock the lock.) 1.Press and hold for 5 seconds untilthe blue light flashes, then remove. 2. The blue light is always on, start fingerprint entry. 3. The same finger was collected more than 5 times, and the fingerprint was collected successfully. 4. The green light is on, the entry is successful; the red light is on, the entry fails. Add ordinary users fingerprints: 1..Press the fingerprint lock panel and hold for 5 seconds until the blue light flashes,then remove. 2.Start the fingerprint verification of first administrator. 3.After the administrator's fingerprint is typed in, the blue light flashes and the type-in status of new fingerprint starts. 4.The same finger was collected more than 5 times, and the fingerprint was collected successfully. 5.The green light is on, the entry is successful; the red light is on, the entry fails. Delete Fingerprint: 1.Press the fingerprint lock panel and hold for 10 seconds until the red light flashes (flashing blue light first during the period) , loosen fingers; 2.Enter the administrator's fingerprint verification. 3. After the green light is on for 1 second, the fingerprint is deleted successfully. Cautions: Deletion of the fingerprint means that all fingerprints can be deleted, instead of deleting certain fingerprint record separately.