All Categories
Get it between 2025-03-04 to 2025-03-11. Additional 3 business days for provincial shipping.
For watering shrub areas with up to 25 feet of spacing between sprinkler heads
6-inch fixed stem mounts on 1/2-inch riser so that stream is above tall shrubs; control with a B-hyve smart controller for optimum water conservation
Low precipitation rate reduces risk of runoff and puddling for many soil types; bottom inlet filter helps prevent clogging of the nozzle in dirty water
Radius and arc are adjustable with a standard slotted screwdriver; radius is adjustable down to 75 percent of maximum distance
Pattern is adjustable from 40 to 360 degrees in precise increments; compatible with rotors from Orbit, Hydro-Rain, and other major brands
Product Description The Titan gear-drive rotor is engineered for installation on a PVC riser above the surrounding landscape. The features and function are the same as the Saturn III except that the Titan does not have pop-up action, so it permanently extends 6 inches above the fitting on which you mount it. It comes with a pre-installed 2 gallon per minute (GPM) nozzle which results in a full-pattern precipitation rate of 0.30 inches per hour at 25-foot square spacing at 40 PSI. This very low rate reduces the risk of runoff or puddling for many soil types and conditions. It includes a radius adjustment screw which allows you to reduce the rotor throw down to 75 percent of its rated distance. It also includes a bottom inlet filter which helps prevent clogging of the nozzle. The body is made from high impact ABS and metal components are made from stainless steel. Adjustment of both the radius and arc requires a standard slotted screwdriver. The inlet is 1/2-inch female pipe thread (FPT). The most common method of installation is on top of a 1/2-inch male pipe thread (MPT) rigid PVC riser. As plants grow you can extend it above the plants via addition of a PVC Coupling and another riser. Recommended operating pressure is 40 PSI. For outdoor irrigation use with cold water only. From the Manufacturer The Titan Shrub Gear Drive is an ideal watering solution for areas with tall plant growth. This above ground gear drive can be attached to a sprinkler riser to water above the shrub or flower line without having to use a canister-type product. Using not