All Categories
Get it between 2025-03-14 to 2025-03-21. Additional 3 business days for provincial shipping.
【Specifications】: Closed End Bulge Acorn Style Lug Nuts - M12x1.5 thread size - Conical 60 Degree Seat - 3/4"(19mm) hex size - 1.4 inch(35.56mm) Overall Length - 22.1mm Overall Diameter.
【Packaging】: 20 Chrome Closed End Bulge Acorn Lug Nuts for Aftermarket Wheels Only.
【Vehicles Fits】: Vehicles with wheel studs requiring a 12x1.5 thread,and wheels that take a conical 60 degree seat with a 3/4" hex, not fit mag seat,ball seat and round seat.
【Process and Material】: Manufactured with SCM 435 cold forged steel. Additional Heat Treating ensures dependable strength & durability. Precisely machined threads ensure a perfect fit on your vehicle's wheel studs. Special coating provides exceptional corrosion resistance and appearance.
【Warranty and Services】: All FLYCLE lug nuts are covered by 1 year warranty,free replacement and full money back guarantee.If you have any questions or dissatisfaction,please feel free to contact us,we will help to solve in time.
SPECS: M12x1.50 thread - Closed End Bulge Acorn Style Lug Nuts - Conical 60 Degree Seat - 3/4(19mm) hex - 1.4 inch(35.56mm) long - 22.1mm wide FITS: Vehicles with wheel studs requiring a 12x1.5 thread and wheels that take a conical 60 degree seat with a 3/4" hex. INCLUDES: 20 Chrome Closed End Bulge Acorn Lug Nuts. Fitment: Buick: 1982-2005 Century;2005-2018 LaCrosse; 1986-2005 LeSabre; 1991-2005 Park Avenue; 1982-2004 Regal 1979-1999 Riviera; 1980-1998 Skylark Cadillac: 1985-2005 DeVille; 1979-2002 Eldorado; 1986-1996 Fleetwood; 1980-2004 Seville Chevrolet: 1995-2005 Blazer; 2017-2019 Bolt EV; 1982-2002 Camaro; 1991-1996 Caprice; 2012-2015 Captiva Sport 1982-2005 Cavalier; 1984-2018 Corvette; 1994-2013 Impala; 1990-2001 Lumina; 1982-2019 Malibu 1982-2007 Monte Carlo; 1982-2004 S10; 1983-1994 S10 Blazer The above shows only some models, if you have any problem ,contact our Customer Experience Team to verify a safe and proper fitment. Installation Instructions: 1. Make sure wheel studs are clean and tight. Replace ortighten a problem stud. 2. Ensure the wheel is flat against mounting surface withstuds through each hole. 3. All nuts should be hand started and thensecured in a criss-cross sequence with a torque wrench and socket. Refer to your vehicleowner's manual or wheel manufacturer's guide for propertorque specifications. 12mm Lug size Should use 70-80 torque(The head and the lower part of this product are welded. If the stud is too long during installation, the head of the nut may be pushed off, and the remaining part will be tightened and tightened). 4. Check and retighten all nuts after 25 miles of driving and again after 50 miles, until wheel nut torque remain sunchanged.