All Categories
Get it between 2024-12-24 to 2024-12-31. Additional 3 business days for provincial shipping.
👉【ALL-IN-ONE POWER CIRCUIT PROBE TESTER】Autel PowerScan PS100 is goal to reduce circuit diagnostic time in all 6-30v vehicle electrical systems. This automotive power circuit probe supports voltage & polarity test, continuity test, signal circuit test, components activate, check bad ground contact, locate short circuits etc. This is a wonderful Christmas present for man/dad.
👉【FOUR MODES】The circuit probe kit’s 4 modes : DC voltage: read the DC voltage with a resolution of 0.1 volts. AC voltage: read the Max/Min voltage, frequency, and duty cycle. Resistance: read the resistance between the tip and auxiliary ground lead. Tone On/Off: technicians use the tone in a dark environment to distinguish the test results.
👉【QUICK SELF-TEST】With the power circuit probe tester connected, perform a quick self-test.The power switch is a momentary rocker switch located on the tool's body. Flanking the switch are positive and negative markings.
👉【CIRCUIT BREAKER】Autel PS100 electrical tester is short-circuit protected. Its internal circuit breaker will trip if it becomes overloaded. The circuit breaker is a valuable test tool as well as a safety measure to protect the tool from overload.
👉【QUICKLY IDENTIFY POLARITY】Autel PS100 instantly checks component continuity and identifies positive, negative and open circuits. When the positive terminal is connected, the red LED light is on, accompanied by a beep. When the negative terminal is connected, the green LED lights up, along with low pitched tone. If it is an open circuit, the LED light will not light.
👉【20FT EXTENSION CABLE】This circuit tester comes with 20ft extension cable, 20ft+20ft allowing you to access any position of the vehicle and test it. The built-in flashlight is convenient for detection, PS100 fuse tester automotive kit can give you a good view in the dark.
Why choose Autel PowerScan PS100 Circuit Battery Tester? Autel PowerScan PS100 is the best electrical tester for reducing diagnostic time in all 6- to 30-volt vehicle electrical systems. After a simple hook-up of the tool to the vehicle's battery, you can: 1. Determine at a glance if a circuit is positive, negative, or open without having to reconnect clips from one battery pole to another.Test for continuity with its built-in auxiliary ground lead. 2. By depressing the power switch, conduct a positive or negative battery current to the probe tip for testing the function of an electrical component without the use of jumper wires. 3. Test for poor ground contacts instantly without performing voltage drop tests. The tool is also short-circuit protected; its internal circuit breaker will trip if it becomes overloaded. 4. PS100 follow and locate short circuits without wasting fuses. The tool's long cable allows you to test along the entire length of the vehicle without constantly searching for suitable vehicle grounds. Autel PowerScan PS100 Specification: Display: TFT color display (160 x 128 dpi) Operating Temperature: 0 to 60°C (32 to 140°F) External Power:12.0 or 24.0 V power provided via vehicle battery Length\Width\Height: 126mm(4.96")\46.5mm(1.83")\35mm(1.38") NW: 0.105kg (0.23lb),GW: 0.726 kg(1.6lb) Autel PowerScan PS100 Package List: 1pc x PS100 main unit 1pc x Probe Tip 1pc x 20ft. Externsion cable 1pc x Cigarette lighter adapter 1pc x Battery hookup clips 1pc x User Manual 1pc x Rugged blow molded case