We specialize in hard to find items
(3)
MAS Epoxies Deep Pour X Epoxy Resin Kit for Casting, Encapsulating, Filling Large Voids, River Tables, Sculptures, Live Edge Wood Tables (1.5 Gallon)
Share Tweet
*Price and Stocks may change without prior notice
*Packaging of actual item may differ from photo shown
- Electrical items MAY be 110 volts.
- 7 Day Return Policy
- All products are genuine and original
About MAS Epoxies Deep Pour X Epoxy Resin Kit For
MAS Epoxies Deep Pour X is a high quality deep pour epoxy system for DIY and professional hobbyists, artists, makers and woodworkers. This clear, high gloss, scratch-resistant low viscosity epoxy resin cures like glass, to let you create a unique piece of furniture, sculpture or art. Deep Pour X is a clear epoxy resin that provides an extended working time that allows deeper pours eliminate the risk of exothermic reaction that can cause shrinking, yellowing or cracking. For best results, all materials and working conditions should be maintained at a constant 60°F-80°F. Epoxy is a temperature sensitive material. When cool, it’s thicker and sets slower. When warm, it’s thinner and sets faster. Working in a shop or with material above 80°F, Deep Pour X may set too quickly and exotherm (become too hot) which could cause it to yellow, distort, shrink or crack. As a general rule, thicker pours require cooler working conditions. An air conditioned workspace is recommended. PLEASE NOTE: This is an advanced deep pour epoxy resin system. DO NOT use Deep Pour X resin in working temperatures above 85°F. Max casting thickness can vary depending on a number of factors including shop temp, material temp, mixing quantity, mold material, project dimensions, etc. Every project is unique, but as a general guideline Deep Pour X should be poured 2-3” thick per pour. Pouring under 2” will take 48-72 hours to cure. Pouring over 3” may result in yellowing, shrinking or cracking. Allow air flow underneath and around mold to help dissipate heat. Step pour multiple layers for thicker castings. When casting materials like wood, leaves, rocks and other substrates, make sure the material is dry and sealed. We recommend sealing any wood or porous surfaces prior to using Deep Pour X Epoxy. Penetrating Epoxy Sealer works great for sealing the wood to reduce the risk of air bubbles and foam appearing while curing (sold separately)
