We specialize in hard to find items
(1)
diymore I2C Display Module 2.42" OLED Digital IIC I2C SPI Serial 128X64 Pixel OLED Screen Display Module SSD1309 for Arduino Project DIY Electronic Arduino Led Display (White)
Share Tweet
*Price and Stocks may change without prior notice
*Packaging of actual item may differ from photo shown
- Electrical items MAY be 110 volts.
- 7 Day Return Policy
- All products are genuine and original
- Cash On Delivery/Cash Upon Pickup Available
diymore I2C Display Module 2.42" OLED Digital IIC Features
-
Resolution: 128 * 64
-
Driver IC: SSD1309
-
Diagonal Screen Size: 2.42 inch
-
Interface Selection: SPI(Factory Setting) or IIC(You need to move the resistor R4 to R3, and solder R5 with 0 ohm resistor.)
-
The driver chip for this screen is SSD1309, which supports 4-wire SPI, I2C and 8-bit interfaces. It does not support 3-wire SPI.
About Diymore I2C Display Module 2.42" OLED Digital IIC
Specification: Font Color: Blue/White/Yellow/Green Diagonal Screen Size: 2.42 inch Resolution: 128 * 64 Driver IC: SSD1309 SPI Interface Definition: 1. GND (power ground) 2. VCC (power supply positive) 3. SCL (clock line) 4. SDA (data line) 5. RES (reset line) 6. DC (data / command) 7. CS (chip select) Notice: Interface Selection: to choose SPI or IIC interface through R15, R17, R13. Seventh leg leads CS signal default; if not, you can go at this time R18 welding CS signal directly to ground. This module defaults to the SPI interface, R17 welding, R15, R13 is not welding. Package Included: 1X 2.42 inch 12864 OLED Display Module IIC I2C SPI Serial SSD1309 LCD Screen for C51 STM32
