All Categories
Get it between 2024-12-31 to 2025-01-07. Additional 3 business days for provincial shipping.
COMPATIBLE MODULES: for fit for Epson Powerlite 1975W 1980WU 1985WU 4650 4750W 4770W 4855WU G5910 HC 1440 PC 1985 EB-1970W 1975W 1980WU 1985WU 4550 4650 4750W 4770W 4850WU 4855WU 4950WU 4955WU H543C H544C H545C H545M H546C H546M H563C V13H010L77 Replacement Projector lamp bulb with Housing
The new generation optimized wick design has better brightness, durability, and stability. Can be used for about 5000 hours, with a brightness increase of over 90%
In pursuit of higher quality, the bulb is installed in a high-quality high-temperature-resistant housing, which is safe to use and easy to install. It can be easily replaced when the projector is turned off, just like taking out an old lamp, exactly matching
Each product has undergone 100% performance testing before leaving the factory to ensure that each product can run with high performance and is brighter and more reliable than other ordinary projector bulbs on the market
Zmstlamp is a professional manufacturer and supplier of projection light sources. We will provide you with a 220-day warranty and a 30-day money-back guarantee, without any conditional feedback within 12 hours, we will do everything we can to make you satisfied. Make your choice without any worries.
Why can you choose to trust us? Because Zmstlamp is pursuing higher-quality projection lamps, it adopts a new generation of upgraded A+ wicks and is equipped with high-performance matrix light control, which greatly extends the actual service life and increases the brightness to 90%, which is brighter than other ordinary projection lamps on the market. The service life is longer, and each product will undergo rigorous calibration and testing before it is sent out, which can achieve the best output of brightness and color. The high quality of the product is guaranteed, so you have no worries about your choice. When to replace the projection lamp: When the indicator light on the projector panel starts to flash orange, or the projected image is darker and blurry than before. When the projector is turned on, a message to replace the lamp appears on the image. In order to get a better projection effect, it is recommended that you replace the projection lamp. How to replace the projector bulb: 1. Turn off the projector and unplug the power cord. 2. Allow the projector lamp to cool down sufficiently. 3. Use a screwdriver to remove the screws on the cover, slide the lamp cover, and loosen the two screws that fix the bulb. 4. Pinch the lamp holder and pull it straight out. 5. Operate the steps in reverse order. Install the purchased Zmstlamp lamp back into the projector and tighten the screws. 6. Install the lamp cover and reset the lamp usage time. Matters needing attention: 1. To avoid burns, the projector needs to cool down for at least 60 minutes before replacing the projector lamp. 2. You can consult us if you have any questions, and we will do everything we can to satisfy you, provide you with a 180-day warranty and a 30-day money-back guarantee, without any conditional feedback within 12 hours, so that you have no worries about your choice.