We specialize in hard to find items
All Categories
Gigabit PoE+ Injector, 30W POE Power Adapter, IEEE802.3af & 802.3at Compliant,100/1000M Fit for Ubiquiti U-POE-at, U-POE-af, POE-48-24W-G, TP-Link TL-POE160S, TRENnet TPE-115GI, Tenda PoE30G-AT,
Share Tweet
*Price and Stocks may change without prior notice
*Packaging of actual item may differ from photo shown
- Electrical items MAY be 110 volts.
- 7 Day Return Policy
- All products are genuine and original
- Cash On Delivery/Cash Upon Pickup Available
Gigabit PoE+ Injector, 30W POE Power Features
-
Auto sensing technology delivers Up to 30W of power over ethernet, Supplies PoE (15.4W) or PoE+ (30W) Power
-
Converts a non-PoE Gigabit port to a PoE+ Gigabit port, Network a PoE device located up to 120 meters (390 ft.) away via Full Duplex Gigabit speeds
-
Integrated power supply for all-in-one design, 1 Gigabit Ethernet port input and 1 PoE+ Gigabit ethernet port output.
-
Plug and Play, no configuration is needed,simply connect a PoE device, accommodates most installations scenarios
-
Compact and cost-effective POE+ injector Compatible with most Gigabit IP camera, IP phone, Wireless IP point and other Gigabit PoE devices.
About Gigabit PoE+ Injector, 30W POE Power
Use PoE injector with PD to expand your network to where there are no power lines or outlets,where you wish to fix devices such as AP ,IP camera or IP Phone etc. This PoE injector is a single port Gigabit PoE injector offer a compact and cost effective,it can convert standard 100-240V ac power into low-voltage.DC that runs over existing LAN cable to power up IEEE 802.3af/at compliant network accessories. Remote powering of wireless LAN(WAN) access points,IP security cameras,VoIP telephone and other low port density installations. Features: Up to 15.4W/30W of Power on 2-pairs for IEEE802.3at and IEEE802.3af POE Devices Supports 10/100/1000 Base-T applications Led indicators power input and PoE output Internal AC/DC converter no need for external power brick Easy plug and play installation Muti-protection, Specification: Pass Through Data Rates: 10/100/1000Mbps Output Power Voltage: 54~55VDC PoE Port Power: 30W max AC Input Voltage: 100-240VAC Ac Input Current: 0.5A 100-240VAC AC Frequency: 50 to 60 HZ Dimensions: 85x42x30 mm & 3.3x1.65x1.18 in System Indicator: AC power Connectors: shielded RJ-45,EIA 568A and 568B Operating Ambient Temperature: -0 to 40 ℃ Storage Temperature: -40 to 60 ℃ Installation Steps: 1.Use a CAT5 UTP cable to connect port of Ethernet devices to the LAN port 2.Connect AC cable with Injector and Socket 3.Connect the PoE OUT port to a PD with CAT5 UTP cable
