All Categories
Features: 1.Designed for laptop, PC and some tablets. 2.Built-in 2.4G nano receiver compartment for storage, easy to carry around. Get Started Step 1: Take out the 2.4G Nano receiver and insert 2 x AA for each mouse and keyboard. Step 2: Plug the nano receiver into the USB port of your laptop/ PC/tablet. Step 3: Switch on both keyboard and mouse and then they will connect to your device automatically. NOTE: The keyboard will enter sleep mode to preserve power after 10 mins of inactivity, press any key and wait for 3 seconds to activate the keyboard again. Solution for keyboard/mouse no response 1.Power off all other 2.4G devices in your room, make sure both the keyboard and mouse are "off" . 2.Plug in the receiver, power on the keyboard and press down the ESC+Q together for 3 seconds, then the keyboard will repair. 3.To repair the mouse, please plug out the receiver and replug. After that, press the left & right clicks at the same time and then power on the mouse. Do not release the clicks for 4 seconds and the mouse will work. NOTE: If the above actions failed, please power off the both, remove the receiver and restart from step 2.Last but not least:If you have any problems,pls contact us.We will give you best service! Thank you~