SABRENT M.2 SATA SSD to 2.5 Inch SATA III/USB 3.0 Aluminum Enclosure Adapter (EC-M2CU) [Not NVMe]

Product ID : 36388654

Available options (color, size, package, etc). Prices may vary.

---

  Share   Tweet

share more:

---

Galleon Product ID 36388654

UPC / ISBN 819921013668

Shipping Weight 0.31 lbs
I think this is wrong?

Model EC-M2CU

Manufacturer SABRENT

Shipping Dimension 8.54 x 5.2 x 0.79 inches
I think this is wrong?

See more product information!

-

₱ 1,572

Price Tracker

+ ₱ 210
International Shipping

via AIR

Get it between 2024-12-03 to 2024-12-10. Additional 3 business days for provincial shipping.

---

BUY NOW!

*Price and Stocks may change without prior notice
*Packaging of actual item may differ from photo shown

---

• Electrical items MAY be 110 volts.
• 7 Day Return Policy
• All products are genuine and original
• Cash On Delivery/Cash Upon Pickup Available

Pay with

SABRENT M.2 SATA SSD to 2.5 Inch SATA III/USB 3.0 Features

• Added protection for your SSD with enclosed housing.

• Convert an m.2 NGFF solid-state drive into a Standard 2.5'' SATA III 6Gbps SSD.

• Compatible with M.2 NGFF SSD and SATA-enable host devices such as Desktop & Laptop computer systems and Hot Swap 2.5'' SATA Bays.

• Standard SATA 22pin connector. Support M.2 from factor: 22x42, 22x60, 22x80.

• System performance maximization. B & B+M Key compatible

About SABRENT M.2 SATA SSD To 2.5 Inch SATA III/USB 3.0

You can now turn your M.2 NGFF SSD drive into a 2.5-inch SATA III or External USB 3.0 Enclosure with the Sabrent EC-M2CU. Exclusively designed for M.2 NGFF SSD B or B+M Key supporting 2242 (42mm), 2260 (60mm), and 2280 (80mm) size drives. Data transfer rates can reach up to 5 Gb/s utilizing this interface. Slim Aluminum casing, Plug and Play no driver install required. Note: It doesn’t support M.2 PCIe NVMe or M.2 PCIe AHCI, Pls check your M.2 SSD type before place order. ● Compatible with M.2 NGFF SSD and SATA-enable host devices such as Desktop & Laptop computer systems and Hot Swap 2.5'' SATA Bays. ● Convert an m.2 NGFF solid-state drive into a USB 3.0 or a Standard 2.5in SATA III 6Gbps SSD. ● This is backwards compatible with USB 2.0 and 1.1 with their transfer speeds. ● Exclusively designed for M.2 NGFF SATA SSD B or B+M Key. ● Added protection for your SSD with enclosed housing. ● Support M.2 from factor: 22x42, 22x60, 22x80. ● System performance maximization. ● Plug and play no drivers required. ● Standard SATA 22pin connector. ● B & B+M Key compatible. Setup instructions: 1. Pull on the plastic piece to open the enclosure. 2. Connect your M.2 SSD B or B+M Key drive into the board. 3. Screw the drive in. 4. Close the case. 5. Screw in the sides. 6. Connect the USB 3.0 cable to the enclosure and to your computer. Package Contents: ● mSATA to SATA 2.5 enclosure ● Micro USB 3.0 ● Screws + Screw Driver ● User manual