All Categories
Highly effective cleaning kit for liquid cooling radiators and systems
Whole system flush that can clean and improve the performance of your system
Contains 125 ml of Mayhems Blitz Part 1 & 2
Also comes with Protective goggles, 60 ml measuring cup, rubber gloves (x2), set of PH test strips and instructions
Mayhems Blitz Pro Cleaning System is the most comprehensive cleaning kit ever released for liquid cooling computers. It has been developed to clean you radiator’s better than new and leave your system in perfect condition. It even comes with a electronic pH test meter so you can check your levels and keep up with regular maintenance on your system Even though this is a cleaning solution it is not a long term effective inhibitor. Never leave it in your system longer than 24 hours. This cleaning system is not safe to use around children and animals. Part 1 and Part 2 of the system uses highly effective cleaning acids down to PH 2 and you must take appropriate measures when using such products. You can dispose of the fluids down the drain once they have been diluted. Contents: · 100ml Mayhems Blitz Part 1, 100ml (will dilute to 2 Ltrs of fluid) · 100ml Mayhems Blitz Part 2, 100ml (will dilute to 4 Ltrs of fluid) · Rubber Gloves 4 sets · Safety Goggles · Instructions · Warning Sheet Part 1 Mayhems Blitz Pro Cleaning DO NOT USE ON ALUMINIUM RADIATORS For internal use on Capper / Brass radiators only. Do not use on plated products. Do not spill on paint work and if you do so, rinse off immediately. · Maximum effectiveness · Rapid neutralisation of surface rust, contamination and oxidation · Rigorous removal of mineral scale deposits · Excellent suspension of particulates · Low foaming · Hard water tolerant · Can be disposed of down grey-water (waste / outside) drain · With "Care" this is easy to handle and straight forward to use · May Improve heat transfer rate Usage of Part 1 of the Mayhems Blitz Pro Cleaning System 1. Put on the Gloves provided in the kit. 2. Mix Part one with deionised water / distilled water (either will do) to a ratio of 50ml of part 1 to 950ml of water. 3. Add to the radiator and clean up any spills immediately. 4. Vent the system of any trapped air and cap the radiator. 5. Leave in Radiator between 6 to 12 hours. 6. After empty do