We specialize in hard to find items
All Categories
(1 Gallon) Artificial Turf Seam Fabric Glue DC - 1 Part Eco-Friendly Synthetic Grass Adhesive - (Designed Specifically for Bonding Various Substrates to Turf)
Share Tweet
*Price and Stocks may change without prior notice
*Packaging of actual item may differ from photo shown
- Electrical items MAY be 110 volts.
- 7 Day Return Policy
- All products are genuine and original
About (1 Gallon) Artificial Turf Seam Fabric Glue DC - 1
Directions for installation: Layout your binder/seam tape Open the glue and pour or spray thin layer on the binder tape. Apply a continuous bed of about 1/16” thick x 6” width, approximately 3” per side to be bonded Mist once or twice with regular water via airless sprayer After application to the substrate or binder fabric, wait about 15 – 25 minutes for adhesive to absorb surface and atmospheric moisture, and then lay down turf. Longer wait time required under drier conditions. Once small bubbles start to develop on the surface of the adhesive, press the artificial grass firmly, applying enough pressure to ensure full contact between both. (you won’t need anything to weigh it down, weighing it down can cause our glue to push out against the turf). Wait 5 minutes - do not lift the turf as lifting will not allow any adhesive to adhere. After 10-15 additional minutes, press seams ensuring contact between both surfaces (a weighted roller may be used for field applications). You can begin brooming and infilling if required after 2-3 hours when the adhesive will harden to the touch. Adhesive will be completely cured in 24 hours. Since XGS SEAM GLUE is a moisture-curing adhesive, the humidity in the air, substrate and artificial grass backing will ultimately affect the outcome of the bonding. Extreme temperature variations will also times.
