All Categories
Light in duct for HVAC: the HVAC UV light is designed to be installed on your HVAC Duct or furnace as an air purifier system to provide a sterilization defense; The in-Duct UV lamp sanitizer helps to keep your central air conditioner out of odors and mold, protecting the health and happiness of your whole family
Powerful UV Air Purifier: the germicidal UVC bulbs are 26 Watts and put out 253.7 nm wavelength UV Light, irradiation range up to 700 sq. ft, the UVC air purifier has strong clean ability, efficient on a single pass, strong sterilization ability and energy saving
Effective Health Protect: the UVC Device is rated for air systems 1-5 tons kills most of existing mold, mildew and will prevent them from ever growing again and spreading; By killing and preventing airborne contaminants, reduce breathing problems, headaches, dizziness, and other long term health problems caused by mold dust and mildew
Easy Installation: installation is easy, just cut holes on your duct-work according to the template on the instruction manual, slip the lamp inside and screw on the screws to fix the UV lamp; Light on (green color) means normal work, do not turn the UV light on until the installation is complete
Replacement UV Bulbs: 13 Watts replacement bulb included (total of 4 bulbs inside the box), total service life up to 26,000 hours; The pure air UV air purifier has an indicator LED, lights on (green color), UV light working normally, the indicator light does not light up means the bulb needs to be replaced
Description 26 Watts HVAC UV Light, 110 V 253.7nm Wavelength UV Light for HVAC Duct Germicidal Filter, in Duct Dual UV Lamp Sanitizer Air Purifier for Whole Room House Air Conditioner with Replacement UVC Bulbs Specification: Voltage: 110V Wavelength: 253.7 NM Irradiation range: 700 SQ. FT Cable length: 4.6 ft (1.4 m) Power: 26 W UV dimension: UV: Dia 17 mm, length 411 mm Base dimension: 258 x 156 x 94 mm UV lifetime: 13000 hours Function: sterilization Recommended use time: when install this lamp in HVAC ducts, recommended turning it on or off at the same time with blower motor. Package included: 1 x UV lamp holder (black) 4 X 13 Watts UV light tube 1 x Manual How to installation: 1. Mark holes from the template included 2. Drill two 2 inch holes for the bulbs 3. Plug bulbs into the device 4. Place device onto duct 5. Install with 4 sheet metal screws 6. Plug device into any grounded 120 v outlet (up to 277 v) 7. Turn it on and you're DONE Warm Tip: 1. UV light can harm eyes and skin, Never expose your eyes directly to the light. 2. When this lamp work, people/plants/pets must keep away from its light. 3. When testing whether the lamp can work (after receive parcel), pay attention to using protection glasses or books/newspapers to block UV light from hurt eyes. READ SAFETY WARNINGS BEFORE YOU ORDER: This device should not be applied for illumination purposes. Exposure to UV light can result in serious hurt, including painful eye and skin irritations.