We specialize in hard to find items
All Categories
SUNLU ASA Filament 1.75mm, UV/Rain/Heat Resistant Tough 3D Printer Filament, Great for Printing Outdoor Functional Mechanical Parts, 0.9kg Spool (1.98lbs), 340 Meters, Orange
Share Tweet
*Price and Stocks may change without prior notice
*Packaging of actual item may differ from photo shown
- Electrical items MAY be 110 volts.
- 7 Day Return Policy
- All products are genuine and original
- Cash On Delivery/Cash Upon Pickup Available
SUNLU ASA Filament 1.75mm, UV/Rain/Heat Resistant Features
-
① 【SUNLU ASA 3D Filament】ASA filament is kind of very strong and tough filament, stronger than PLA filament and ABS filament. No clog, no bubble, no tangle, good layer adhesion, easy to use.
-
②【Super Neat Filament Spool】Spool Diameter: 8.00", Spool Width: 2.50", Spool Hub Hole Diameter: 2.20". The size of the SUNLU filament spool is suitable for hanging on a lot of FDM 3D printers.
-
③【1.75mm Filament Diameter】Dimensional Accuracy +/- 0.02mm. SUNLU filament has wide compatibility due to the small diameter error, it's suitable for almost all 1.75mm FDM 3D printers.
-
④【Recommend Settings】We recommend printing at a nozzle temperature of 230-260°C(446-500°F), bed temperature of 80-120°C(176-248°F), printing speed of 50-100mm/s.
-
⑤【UV/Rain/Heat Resistant】SUNLU ASA 3D printing filament is great for printing outdoor functional mechanical parts, UV/Rain/Heat highly resistant.
-
⑥【SUNLU Professional Team】SUNLU is a high-tech enterprise specializing in R&D, production and sales of 3D filament, 3D printer, 3D pen, filament dryer, 3D resin and resin UV light curing box.
About SUNLU ASA Filament 1.75mm, UV/Rain/Heat Resistant
SUNLU ASA 3D printer filament, super neat filament spool, UV/Rain/Heat highly resistant, tough strong 3D printing filament, great for printing outdoor functional mechanical parts.Recommend SettingsNozzle/Extrusion temperature: 230-260°C(446-500°F);Bed/Platform temperature: 80-120°C(176-248°F);Printing speed: 50-100mm/s;These settings are for 0.4mm nozzle, it may be different with different diameters nozzle.Please do 3 steps for checking if the filament does not stick to the build bed.Temperature Checking-Please check the temperature(bed and nozzle) settings before printing and set them suitable;Building Bed Checking-Please check if the bed is level, make sure the nozzle doesn't too far or too close to the bed;Speed Checking-Please check if the printing speed of the first layer is too fast.NotesPlease insert the filament into the side holes after use to avoid tangles;Please store the 3D printer filament in a sealed bag or box after using it.
