We specialize in hard to find items
(1)
Protopasta 3D Printer Filament | PLA Filament 1.75mm | Amie's Blood of My Enemies Translucent Red HT PLA | 500g Spool
Share Tweet
*Price and Stocks may change without prior notice
*Packaging of actual item may differ from photo shown
- Electrical items MAY be 110 volts.
- 7 Day Return Policy
- All products are genuine and original
- Cash On Delivery/Cash Upon Pickup Available
Protopasta 3D Printer Filament | PLA Filament Features
-
Translucent Red HTPLA - Amie's "Blood of My Enemies" is an original, one-of-a-kind, translucent dark red filament designed by filament workshop attendee Amie. A deep, blood red in a translucent base with no additional texture
-
Finishing Variety - With the option to heat-treat, wire brush, or polish this filament 1.75 gives you plenty of different choices to give your finished product a different look.
-
High Quality - Proto-pasta offers only U.S-made, high-quality 3D printer filament PLA. Using only premium materials with a focus on craftsmanship this PLA 1.75 is one you can trust to get the job done.
-
Easier to Use - This PLA Filament 1.75 mm has been flow-optimized and has less moisture than standard PLAs to help avoid heat soak and to keep mass flow up. This combination of features makes it easier to use than most standard PLAs.
-
Widely Compatible - Designed to work with most standard 3D printers this 3D filament PLA 1.75 has a wide range of compatibility that allows you to run a business or simply create premium pieces in the comfort of your own home.
About Protopasta 3D Printer Filament | PLA Filament
Amie's Blood of My Enemies Translucent Red HT PLA - 500g Spool. Material DataBase resin: HTPLA - Heat Treatable PLAParticle size: less than 250 microns (0.25mm)Odor: low or noDensity: Approx. 2.30 g/ccLength (500g): 97m (1.75mm) and 36m (2.85mm)Heat treating: 110C (225F) for 10 min or as required for the desired resultTotal loss of stiffness (before heat treat): 50-60C (Tg)Total loss of stiffness (after heat treat): 150-175C (melting)Dimension change (before heat treat): 0% X/Y/ZDimension change (after heat treat): 1.5% shrink X/Y and 1% growth Z typical but please calculate and confirm for your specific print and processPrinter SettingsSpeed: 10-20 mm/s 1st layer, 20-80 mm/s rest of partNozzle Set-point: 185-215C (hottest on 1st layer for best adhesion)Nozzle Actual: maintain set-point, reduce speed if less thanNozzle Type: Standard or wear-resistant for extended useNozzle Diameter: 0.6mm or larger preferred, 0.4mm okay with 0.25mm minimum for expertsLayer thickness: 0.15-0.20mm recommended for a balance of quality, reliability, and productivityBed Temperature: Room-60C (over 60C can worsen warp)Bed Preparation: Elmers purple disappearing glue stick or your other favorite PLA surface preparation
