We specialize in hard to find items
All Categories
ANYCUBIC Matte PLA Filament 1.75mm, FDM Printer Filament 1kg Spool (2.2 lbs), Dimensional Accuracy +/- 0.03 mm (1kg, Matte Yellow)
Share Tweet
*Price and Stocks may change without prior notice
*Packaging of actual item may differ from photo shown
- Electrical items MAY be 110 volts.
- 7 Day Return Policy
- All products are genuine and original
- Cash On Delivery/Cash Upon Pickup Available
ANYCUBIC Matte PLA Filament 1.75mm, FDM Printer Features
-
๐๐จ๐๐ญ & ๐๐ฅ๐๐ ๐๐ง๐ญ: Matte texture with fewer visible layer lines provides with soft touch and elegance . Macaron color enhances the prints' quality with higher level of detail. The 3D printing matte PLA filament was neat on the roll and leaves the spool easily without any crossed turns. Resulting in less thread pulling and twisting, no clogging, super under-extruding
-
๐๐๐๐ฎ๐ซ๐๐๐ฒ & ๐๐๐ฌ๐ฒ ๐๐ฎ๐ฉ๐ฉ๐จ๐ซ๐ญ ๐๐๐ฆ๐จ๐ฏ๐๐ฅ: Anycubic 3D Printer PLA filament of 1.75mm diameter, minimum dimensional tolerance +/- 0.03 mm, which making filament outflow smoother, came out homogeneous. With a 3 years storage capacity, It has excellent mechanical properties with strong toughness and low shrinkage which makes it easier to remove the support of the prints
-
๐๐ฅ๐จ๐ -๐ ๐ซ๐๐ & ๐๐ฎ๐๐๐ฅ๐-๐ ๐ซ๐๐: Designed and Manufactured with Clog-Free to ensure a smooth and stable printing experience with our PLA refills. Completely dried for 24 hours before packaging and vacuum sealed with desiccants in nylon re-bag, enable much smoother and more stable printing. Larger spool inner diameter design makes feeding smoother
-
๐๐ข๐๐ ๐๐จ๐ฆ๐ฉ๐๐ญ๐ข๐๐ข๐ฅ๐ข๐ญ๐ฒ: Made from starch raw materials derived from renewable plant resources, PLA filament boasts lower melting temperature, even does not need a heated bed. No odor, no pollution and non-toxic during the printing. Anycubic PLA Filament Compatible perfectly with most FDM 3D Printers and 3D Pens that use 1.75MM filament on the market, such as Prusa, Makerbot, MK3, Ender 3, CR 10, Kobra, Mega, Chiron, Monoprice FlashForge and more
-
๐ ๐ข๐ฅ๐๐ฆ๐๐ง๐ญ ๐๐ง๐ฌ๐ญ๐๐ฅ๐ฅ๐๐ญ๐ข๐จ๐ง: 1. Install the spool on the spool holder of a 3D printer, and preheat the nozzle of the 3D printer. 2. Cut the filament tip diagonally, and guide it through the extruder and feeding tube. 3. Manually push the filament through the feeding tube to the nozzle, until the filament melt through the nozzle. Note: When installing and changing filament, we highly suggest to preheat the nozzle firstly to reduce the nozzle block risk
