We specialize in hard to find items
(1)
FYSETC Ender 3 S1 Pro Ender 5 S1 PEI Head Bed Spring Steel Plate with Sticker Flexible Heated Bed Cover 235x235mm/9.2inch for Ender 3 V2 Neo Ender 3 Pro Ender 5 Pro CR-20 Pro Neptun3 AqulaX2
Share Tweet
*Price and Stocks may change without prior notice
*Packaging of actual item may differ from photo shown
- Electrical items MAY be 110 volts.
- 7 Day Return Policy
- All products are genuine and original
- Cash On Delivery/Cash Upon Pickup Available
FYSETC Ender 3 S1 Pro Ender 5 S1 PEI Head Bed Features
-
Build Surface size - 235x235mm/9.2x9.2in. Applicable models: Ender 3/Ender 3 V2/Ender 3 Neo/Ender 3 S1/Ender 5/Neptune 3/Kobra/Aquila C2/X2/S2/S2 Pro/X3, or other hot bed size 235x235mm/9.2x9.2in model.
-
Excellent Adhesion & Removable - Upgrades build surface provides the best adhesion. Custom designed PEI materials to make your print easy. Once the hotbed cools back to room temperature, lift off the mat and gently bend the pei sheet, the base will release the model which can be easily removed by hand.
-
Advantage - Our sticker and films have been formulated to resist high temperature, so you can heat your bed to high temps for specialty filaments and not worry about loss of performance.
-
Easy to Install - Please tear off the back paper from sticker base and sitck it to your heated bed, then align the steel plate on it. The side with PEI is upside to print on. Perform a one-time z-height adjustment to keep the bed level. Please mind the distance between the nozzle and pei surface to avoid scratching. Before printing, please remove the protective film on the PEI surface. When complete printing, let the plate cool down, then simply remove the prints.
-
Kindly Tips - We have sticked PEI on the steel plate by machine, so you don't need to worry about bubbles. if you received package but found the air bubbles or Scratches, please don't worry, they are the surface layer, PEI will not be affected.
About FYSETC Ender 3 S1 Pro Ender 5 S1 PEI Head Bed
Feature: PEI Sheet Use: Thickness: about 0.17mm Compatible with PLA ABS PETG TPU and other most filaments. The Polyetherimide sheet comes with strong adhesive already laminated to the PEI. Level the bed and set the height of the nozzle before printing. When the print is completed, let the bed cool, and the part will be easy to release from the PEI surface. Parts are actually easier to remove if released before the bed becomes completely cold. Sticker Base: that is adhesive-backed for easy installation PEI Sheet Maintenance: Acetone can be used instead of isopropyl alcohol, or steel wool pads with detergent, but the bed must be cold if acetone is used. Optionally, light sanding with 600-1000 grit sand paper can be done after lots of printing to give the PEI sheet more life. Package Includes: 1X 235mm Steel Spring with PEI 1X 235mm sticker side
