SUNLU Easy PA Filament 1.75mm, Nylon 3D Printer Filament 1.75mm ±0.03mm, Fit Most FDM 3D Printer, 1KG Cardboard Spool. (Black)

Pay with

SUNLU Easy PA Filament 1.75mm, Nylon 3D Printer Features

• 【Read Before Your Buying】- This filament is made from recycled materials, not raw ones. Its color may not be as bright, but if used within six months, the printing quality will remain similar.

• 【SUNLU Recycled 3D Printer Filament】- ‘Recycled Filament’ does not refer to reusing second-hand filaments, but rather to repurposing semi-finished filaments not produced as planned during manufacturing.

• 【High Performance Nylon】- Nylon 3D printing filament has excellent mechanical properties. Perfecy for living hinges,functional parts,industrial parts,household parts.

• 【Heat Resistant PA】- Heat resistance up to 121°C. Nylon filament Tools are ideal for high-temp applications, such as fuel dispensers, electronic surface mount devices.

• 【Neatly Wound Filament】- SUNLU developed our own filament neatly lined up, which significantly reduces pauses in the printing process due to wire entanglement

• 【1.75mm Dimensional Accuracy】- 3D Printer PLA filaments have strict tolerances. Diameter 1.75mm, dimensional accuracy +/- 0.03mm without any exaggeration.

• 【Recommend Settings】- We recommend printing the Easy PA 3D filament at a nozzle temperature of 270-280℃, bed temperature of 30-50℃, printing speed of 100-150mm/s.

• 【Cardboard Reel Filament】- SUNLU 3D Filament 1.75mm packaging with fully recycled cardboard spool and box.Spool Diameter: 200mm, Spool Width: 67±2mm, Spool Hub Hole Diameter: 55mm.

• 【Wide Compatibility】- SUNLU 3D Printing Filament has small diameter error, wide compatibility, and can be used on various common 3D printers.

• 【SUNLU Main 3D Products】- SUNLU offers a wide range of high-quality 3D printing products, including 3D printing filaments, 3D printers and various materials.

About SUNLU Easy PA Filament 1.75mm, Nylon 3D Printer

PLA 3D printer filament is the most basic, the most used filament, no clog, no bubble, no tangle, SUNLU PLA filament has good layer adhesion, very easy to use. Recommend Settings Nozzle/Extrusion temperature: 200-230℃; Bed/Platform temperature of 50-65℃; Printing speed: 50-100mm/s; These settings are for 0.4mm nozzle, it may be different with different diameters nozzle. 3 Steps Checking: Why is the Filament Not Sticking to the build bed? Temperature Checking - Please check the temperature(bed and nozzle) settings before printing and set it suitable; Building Bed Checking - Please check if the bed is level, make sure the nozzle doesn't too far or too close to the bed; Speed Checking - Please check if the printing speed of the first layer is too fast. Notes Please insert the filament into the side holes after use to avoid tangles; Please store the 3D printer filament in a sealed bag or box after using it.