We specialize in hard to find items
All Categories
Magnetic G10 Garolite 3D Printer Build Plate for PLA, PETG, ABS, and Nylon for Bambu Lab X1C, P1S, X1, P1P, A1, X1E
Share Tweet
of brand new stock?
or
Need this item ASAP?
Check if this is available on Amazon
or available in other sites
Send us the link so we can buy for you
Magnetic G10 Garolite 3D Printer Build Plate for Features
-
Easy Bed Adhesion - PLA, PETG, ABS, and Nylon stick to the G-10 composite bed without the use of glue-stick, hairspray, or painters tape
-
Magnetic Base - We use a cold-rolled sheet of stainless steel to magnetize the G-10 build plate, making swapping surfaces easy
-
Easy Print Removal - Parts pop off the build plate once the surface returns to room temperature
-
QR Code - We included the QR code for the High Temp PEI plate, so you don't have to manually start prints
-
1.5mm Thick G-10 - Thick enough to stay perfectly flat, while being thin enough to flex large prints off the build plate.
-
Simple to Maintain - Just wipe with isopropyl alcohol after each print. Build plate comes pre-textured, so there is no need to sand the surface down yourself.
-
Easy to Install - Remove your printer's original build plate, and replace it with the Magnetic Composite Build Plate.
About Magnetic G10 Garolite 3D Printer Build Plate For
Easy Bed Adhesion - PLA, PETG, ABS, and Nylon stick to the G-10 composite bed without the use of glue-stick, hairspray, or painters tape Easy Print Removal - Parts pop off the build plate once the surface returns to room temperature Magnetic Base - We use a cold-rolled sheet of stainless steel to magnetize the G-10 build plate, making swapping surfaces easy QR Code - We included the QR code for the High Temp PEI plate, so you don't have to manually start prints 1.5mm Thick G-10 - Thick enough to stay perfectly flat, while being thin enough to flex large prints off the build plate. Simple to Maintain - Just wipe with isopropyl alcohol after each print. Build plate comes pre-textured, so there is no need to sand the surface down yourself. Easy to Install - Remove your printer's original build plate, and replace it with the Magnetic Composite Build Plate.
