Stronghero3D PLA 3D Printer PLA Filament 1.75mm,Core Shell Co Extruded Dual Colors Filament,Mirror Chrome Glitter Blue Purple Black Filament,Net Weight 1kg/2.2lb for Ender3 P1S P1P X1C

Pay with

Stronghero3D PLA 3D Printer PLA Filament Features

• 3D printer filament ,pla filament,pla 1.75mm, net weight 1kg.Co extrude core shell structure, the core is PETG and shell is PLA.

• PLA color in surface ,mirror chrome chameleon effect purple and blue color, petg black and green color in core appear frequently to the surface while printing some place of curved and ladder like,which makes the color change fast.

• Printing setting recommend heated bed 50-60°C, nozzle 195-220°C,printing speed 25-300 mm/s,retraction lenth 3-5mm, support flow 70%.

• To prevent filament tangling, make sure to secure the filament end either within the spool's designated hole or elsewhere after 3D printing. In case the filament end accidentally slips past during extrusion, rewind the filament to check for any potential tangles.

• In order to reduce possible warping of the first layer, we recommend preheating the hot bed temperature to 55-65 degrees, reducing the printing speed of the first layer to 25mm/s, and setting the line width to 0.6mm or the flow rate to 150%, excessive fan cooling in cooler weather will worsen edge warping.

• PLA filament 1.75mm,net weight 1kg.Vacuum sealed and includes silica desiccant

About Stronghero3D PLA 3D Printer PLA Filament

PLA core shell filament