We specialize in hard to find items
All Categories
8 Wheel Trolley Assembly Rollers.Bearing Trolley Assembly.Stainless Steel.The top of The Trolley has Room for Set Screws, Allowing The use of a 1-5/8" high Strut Channel
Share Tweet
*Price and Stocks may change without prior notice
*Packaging of actual item may differ from photo shown
- Electrical items MAY be 110 volts.
- 7 Day Return Policy
- All products are genuine and original
- Cash On Delivery/Cash Upon Pickup Available
8 Wheel Trolley Assembly Rollers.Bearing Trolley Features
-
1:Load bearing: 1 / 1200 LB, 2 / 2400 LB
-
2:Scope of application： P1000, P1001 , P5000, P5001, P5500, P5501 and All 1-5/8" or Taller Strut Channel
-
3:Material: Made of Stainless Steel, the strength is 3 times that of ordinary Steel. The Bearing is a pressure-Bearing silent maintainable Bearing with a service life twice that of the steel ring sealed Bearing (open the black side cover and add lubricating oil). The Bearing material is high-quality Bearing steel.
-
4:About the fixing screw of Strut Channel: There is a distance of 7mm(0.2756in) from the top of the center of the two bearings to the top of the bearing. Screws within 7mm(0.2756in) can be selected, which will not hinder the forward and backward sliding
-
5：The front end of the trolley assembly has a raised anti-collision protection device, which can avoid the damage to the bearing caused by the impact after sliding to the end
About 8 Wheel Trolley Assembly Rollers.Bearing Trolley
1：Trolley material: Stainless Steel.2：Bearing type:SKF6200-RS1 (using first-class rubber ring sealed bearings, load-bearing capacity and life is more than 1.5 times that of steel ring bearings, the price is twice that of steel ring bearings) 3： The pin shaft for mounting the bearing: pin shaft is solid alloy steel pin shaft. 50 tons of press to pin shaft extrusion into the bearing inside, and bearing perfect combination, very strong, you do not need to worry about it will fall off (refused to use no safety hollow iron pin) after each pin shaft and bearing combination we will check it, to ensure that it is comfortable.To ensure smooth rolling of the bearing4: surface treatment process: cold galvanizing (to protect the steel from corrosion, anti-corrosion more effective and thorough;)5：You can use three strut channe and four Roller Trolley in conjunction to achieve the movement of the electric hoist in any direction.6:Don't worry about the Strut Channels mounting screws affecting the Roller Trolley's sliding back and forth .Roller Trolley Has a Height of 7mm(0.2756in) in the Center Space, so You can Choose a set Screw of 7mm(0.2756in) or Less When Installing the Strut Channel, Which Will not Obstruct the Back and Forth Sliding of the Trolley.
