Armacost Lighting LED Lighting Bundle with Dimmer and Tape Light (32.8 ft)

Pay with

Armacost Lighting LED Lighting Bundle with Dimmer Features

• Includes a 45-watt dimmable LED driver that provides smooth, flicker-free dimming for 12V LED lighting (Armacost Lighting 840450)

• Compatible with 120V AC dimmers and lighting controls as well as low-voltage DC dimmers and controls (Armacost Lighting 840450)

• Includes 32.8 ft of RibbonFlex Pro LED tape light with 30 LEDs/m, 3000K color temperature (Armacost Lighting 141250)

• LED tape light features 3M adhesive backing for easy peel and stick installation (Armacost Lighting 141250)

• LED driver and tape light are fully dimmable from 0-100% brightness with compatible dimmers and controllers (sold separately)

About Armacost Lighting LED Lighting Bundle With Dimmer

Armacost Lighting 840450 for LED Lighting, with Removable AC Cord, 45 Watt, White Arm cost Lighting 45-Watt dimmable LED driver provides outstanding LED dimming performance and architectural-quality brightness control. Although virtually all dimmers will work with this dimmable LED driver, Arm cost Lighting recommends Lutron CFL and Leviton illumatech universal dimmers because of their low end dimming range adjustment. Delivers smooth, stable, flicker-free dimming with soft start and desirable fade-on and fade-to-dark performance. When a dimmer is set to full brightness, LED driver deliver full brightness – there is no loss of top-end light output. Direct wire driver has full safety shut off protection in case of lighting overload, open circuit, short circuit, over-temperature, or other fault, automatic restart after the fault has been corrected this is a listed class 2 power unit for safety and has class II AC inputs, fully isolated case, no ground wire is required. Indoor/outdoor, etc listed for use in dry and damp locations. To work properly, your LED lighting must operate on 12-volt dc power and be able to be dimmed. This driver works well with all 12V dc LED tape lighting. For other types of LED lighting contact the manufacturer to confirm you lighting is dimmable and it operates on 12-volt dc power. Disconnect AC cord plug when using an AC dimmer. The National Electrical Code® (NEC) prohibits dimming lights that are connected to standard plug-in receptacle outlet (note that this does not apply to wireless plug-in “lamp dimmers”). Use direct wire installation method with an AC dimmer or use an Armacost Lighting low-voltage dimmer on the 12-volt side Armacost Lighting 141250 RibbonFlex Pro Tape Light, 30 LEDs/m 32.8 ft, 3000K, Armacost Lighting’s RibbonFlex Pro LED Tape Light is the perfect LED light strip for low-voltage, energy-efficient accent lighting projects. These LED strip lights are designed to meet the layout and installation requirements of lighting professionals and feature high quality, professional-grade components that are longer lasting and create a premium look.12V strip lights are easy-to-install and feature 3M adhesive backing for a permanent hold. LED light tape is ideal for many applications including under cabinet lighting, tray ceiling lighting, toe kicks, RVs, boats, motor homes and commercial spaces. RibbonFlex Pro LED Tape Light is part of Armacost Lighting’s premium-quality component-based system, designed for custom installations.