HOLKIE 4 inch Gate Wheel Set of 2, Gate Wheels for Wooden Gate, Anti Sag Gate Kit, Fence Gate Wheel 220 LBS Capacity Per Wheel Silver

Pay with

HOLKIE 4 inch Gate Wheel Set of 2, Gate Wheels for Features

• Stable Construction: Combined thickened galvanised steel brackets with premium TPR material wheel, this gate wheel with brake manages to hold up a door or fence of 220 LBS (per caster) perfectly. The ball bearing in this gate wheel can help you adjust the direction of the movement easily.

• Built-in Spring: The unique built-in spring design not only can prevent sand and gravel from entering the spring and causing damage and scratches, but also reduces the effects of rain and sun exposure on the spring, which extends the lifespan of the spring.

• Absorb Shock: The extension of the spring is up to 1.73 inch, which helps it supports the gate nicely and balances the loading of the gate well In the meantime, it is able to let the wheels move steadily on uneven ground. Please mind that it could not be used on some deep pits or extremely uneven ground.

• NOTE: To prevent the gate from suspension when the gate casters meet a concave ground, it would be necessary to press the spring of the gate wheels in advance while installation. So that the gate wheels would be able to support the gate while moving to a concave floor.

• QUALITY GUARANTEE: The package contains 2 x Spring-loaded gate caster wheel, 6 x 90mm*M8 bolts, 6 x M8 nuts and 6 x washers. 1 year warranty, 30 days money back guarantee, free replacement. Contact us if you need any help, we will reply you as soon as we can.

About HOLKIE 4 Inch Gate Wheel Set Of 2, Gate Wheels For

FEATURES - Spring-loaded design to better cope with uneven floors - 360 degree swivel head, can move the gate easily - High quality TPR material, not easy to wear and tear - Rust-resistant galvanized bracket for longer service life - Max Load capacity up to 220 lbs per wheel - Widely used for gates, farm gates, garage gates Installation Steps 1-Assemble the castors with the brackets 2-Identify and mark the hole locations 3-Use a drill bit larger than 5/16" (8mm) to make the holes at the marked position 4-Use the provided screws to assemble into the bracket and then fix the casters to the door NOTE: 1-To prevent the wheels from overhanging when moving on a concave surface, the springs must be loaded by pressing down on them before locating and marking the holes 2-Install gate casters as far away from the hinges as possible for maximum effectiveness. WHAT YOU CAN GET - 2x Gate Casters - 6x 90mm*M8 bolts - 6x M8 nuts - 6x Washers - 30 days money back guarantee - 1 year warranty