Corby Bolt Fasteners (10 Pack) for DIY Handles & Knife Handle Repair - USA Size (0.156 x 0.120 x 0.9 Inch) - (Brass) - for Full Tang Fixed Blade Knives

Pay with

Corby Bolt Fasteners (10 Pack) for DIY Handles Features

• (10) Corby Bolt Fasteners USA Size (0.156 x 0.120 x 0.9 Inch) | CKK Industries designed Corby Bolts are used for all types of knife and tool handle construction. You’ll see them in use on steak knives, chef knives, butcher knives, traditional hunting knives, and many others. They work very well for cutlery repair and new handle creation.

• Head Diameter = 0.156 in. (ea.) | Head Length = 0.250 in. (ea.) | Corby Bolts are used to fasten a set of handle scales on to the tang of a knife or tool. They work by passing through the handle tang and handle material layers and creating a “pinch” effect. Corby Bolts feature differential head and shaft diameters. The head of each side of the Corby Bolt assembly is slightly larger than the shaft diameter. This creates the “pinch point” when used with a “stepped” pre-drilled hole.

• Shank Diameter = 0.119 in. | Shank Length = 0.340 in. | Corby Bolts can be sanded off like normal pin stock to create a seamless transition between handle material and fastener. When sanded correctly, they will be indistinguishable from regular pins. Corby Bolts can be used with any type of handle material, with or without liner material layers. They are truly versatile handle fasteners. They also work well for knife and tool repair.

• Overall Length (min.) = (0.90 in.) | Overall Length (max) = (1.1 in.) | CKK Industries Corby Bolts are designed in the U.S.A. and fit American standard cutlery part sizes. Our head and shank diameters are created around American standard drill and hole sizes. We also offer matched step drills for each of our Corby Bolt sizes to help you create the perfect mounting hole.

• Thread = US 2-56 | Driver = Hex (0.078) | Material = Brass | Our U.S.A. designed Corby Bolts are offered in three standard materials. We feature Stainless Steel, Brass, and Aluminum 2-part Corby Bolt assemblies. These material types are the most common for knife handle construction and will match most commercial and custom handle finishes when replacing or repairing.

About Corby Bolt Fasteners (10 Pack) For DIY Handles

These are Corby Bolts. They are used for knife handle fasteners. With this design, you will create a step hole in your handle material that is slightly larger than the shank of the fastener. The two-part assembly allows for you to pass the shank precisely through your knife tang hole and handle material, allowing the larger radius of the Corby Bolt heads to create a pinch point on both sides of the handle material where it can then be tightened down to a secure hold. Once the bolt has been tightened, it can be sanded to a flush finish with the handle surface. This will result in a smooth, pin-like visual effect on the final knife handle. When used with epoxy and/or thread-locker adhesive, they will create a permanent handle bond. Specifications Head Diameter = .156 in. (ea.) Head Length = .250 in. (ea.) Shank Diameter = .119 in. Shank Length = .340 in. Overall Length (min) = (.90 in) Overall Length (max) = (1.1 in) Thread = US 2-56 Driver = Hex (.078) Material = Brass Sold As: (10) Corby Bolt Sets = (10) Threaded Males + (10) Threaded Females